This is a guide to the internal structures of R and coding standards for the core team working on R itself.
This manual is for R, version 4.5.0 Under development (2024-10-01).
Copyright © 1999–2024 R Core Team
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the R Core Team.
CHARSXP
sCHARSXP
cache.Internal
vs .Primitive
This chapter is the beginnings of documentation about R internal structures. It is written for the core team and others studying the code in the src/main directory.
It is a work-in-progress and should be checked against the current version of the source code. Versions for R 2.x.y contain historical comments about when features were introduced: this version is for the 3.x.y series.
CHARSXP
sCHARSXP
cacheWhat R users think of as variables or objects are
symbols which are bound to a value. The value can be thought of as
either a SEXP
(a pointer), or the structure it points to, a
SEXPREC
(and there are alternative forms used for vectors, namely
VECSXP
pointing to VECTOR_SEXPREC
structures).
So the basic building blocks of R objects are often called
nodes, meaning SEXPREC
s or VECTOR_SEXPREC
s.
Note that the internal structure of the SEXPREC
is not made
available to R Extensions: rather SEXP
is an opaque pointer,
and the internals can only be accessed by the functions provided.
Both types of node structure have as their first three fields a 64-bit
sxpinfo
header and then three pointers (to the attributes and the
previous and next node in a doubly-linked list), and then some further
fields. On a 32-bit platform a node1 occupies 32 bytes: on a 64-bit platform typically 56
bytes (depending on alignment constraints).
The first five bits of the sxpinfo
header specify one of up to 32
SEXPTYPE
s.
Currently SEXPTYPE
s 0:10 and 13:25 are in use. Values 11 and 12
were used for internal factors and ordered factors and have since been
withdrawn. Note that the SEXPTYPE
numbers are stored in
save
d objects and that the ordering of the types is used, so the
gap cannot easily be reused.
no SEXPTYPE Description 0
NILSXP
NULL
1
SYMSXP
symbols 2
LISTSXP
pairlists 3
CLOSXP
closures 4
ENVSXP
environments 5
PROMSXP
promises 6
LANGSXP
language objects 7
SPECIALSXP
special functions 8
BUILTINSXP
builtin functions 9
CHARSXP
internal character strings 10
LGLSXP
logical vectors 13
INTSXP
integer vectors 14
REALSXP
numeric vectors 15
CPLXSXP
complex vectors 16
STRSXP
character vectors 17
DOTSXP
dot-dot-dot object 18
ANYSXP
make “any” args work 19
VECSXP
list (generic vector) 20
EXPRSXP
expression vector 21
BCODESXP
byte code 22
EXTPTRSXP
external pointer 23
WEAKREFSXP
weak reference 24
RAWSXP
raw vector 25
OBJSXP
objects not of simple type
Many of these will be familiar from R level: the atomic vector types
are LGLSXP
, INTSXP
, REALSXP
, CPLXSP
,
STRSXP
and RAWSXP
. Lists are VECSXP
and names
(also known as symbols) are SYMSXP
. Pairlists (LISTSXP
,
the name going back to the origins of R as a Scheme-like language)
are rarely seen at R level, but are for example used for argument
lists. Character vectors are effectively lists all of whose elements
are CHARSXP
, a type that is rarely visible at R level.
Language objects (LANGSXP
) are calls (including formulae and so
on). Internally they are pairlists with first element a
reference2 to the function to be called with remaining elements the
actual arguments for the call (and with the tags if present giving the
specified argument names). Although this is not enforced, many places
in the code assume that the pairlist is of length one or more, often
without checking.
Expressions are of type EXPRSXP
: they are a vector of (usually
language) objects most often seen as the result of parse()
.
The functions are of types CLOSXP
, SPECIALSXP
and
BUILTINSXP
: where SEXPTYPE
s are stored in an integer
these are sometimes lumped into a pseudo-type FUNSXP
with code
99. Functions defined via function
are of type CLOSXP
and
have formals, body and environment.
The SEXPTYPE
OBJSXP
is for S4 and other objects which do not
consist solely of a simple type such as an atomic vector or function.
Note that the size and structure of the header changed in R 3.5.0: see earlier editions of this manual for the previous layout.
The sxpinfo
header is defined as a 64-bit C structure by
#define NAMED_BITS 16
struct sxpinfo_struct {
SEXPTYPE type : 5; /* discussed above */
unsigned int scalar: 1; /* is this a numeric vector of length 1?
unsigned int obj : 1; /* is this an object with a class attribute? */
unsigned int alt : 1; /* is this an ALTREP
object? */
unsigned int gp : 16; /* general purpose, see below */
unsigned int mark : 1; /* mark object as ‘in use’ in GC */
unsigned int debug : 1;
unsigned int trace : 1;
unsigned int spare : 1; /* debug once and with reference counting */
unsigned int gcgen : 1; /* generation for GC */
unsigned int gccls : 3; /* class of node for GC */
unsigned int named : NAMED_BITS; /* used to control copying */
unsigned int extra : 32 - NAMED_BITS;
}; /* Tot: 64 */
The debug
bit is used for closures and environments. For
closures it is set by debug()
and unset by undebug()
, and
indicates that evaluations of the function should be run under the
browser. For environments it indicates whether the browsing is in
single-step mode.
The trace
bit is used for functions for trace()
and for
other objects when tracing duplications (see tracemem
).
The spare
bit is used for closures to mark them for one-time
debugging.
The named
field is set and accessed by the SET_NAMED
and
NAMED
macros, and takes values 0
, 1
and 2
, or
possibly higher if NAMEDMAX
is set to a higher value.
R has a ‘call by value’ illusion, so an assignment like
b <- a
[The NAMED
mechanism has been replaced by reference counting.]
appears to make a copy of a
and refer to it as b
.
However, if neither a
nor b
are subsequently altered there
is no need to copy. What really happens is that a new symbol b
is bound to the same value as a
and the named
field on the
value object is set (in this case to 2
). When an object is about
to be altered, the named
field is consulted. A value of 2
or more means that the object must be duplicated before being changed. (Note
that this does not say that it is necessary to duplicate, only that it
should be duplicated whether necessary or not.) A value of 0
means that it is known that no other SEXP
shares data with this
object, and so it may safely be altered. A value of 1
is used
for situations like
dim(a) <- c(7, 2)
where in principle two copies of a
exist for the duration of the
computation as (in principle)
a <- `dim<-`(a, c(7, 2))
but for no longer, and so some primitive functions can be optimized to avoid a copy in this case.
The gp
bits are by definition ‘general purpose’. We label these
from 0 to 15. Bits 0–5 and bits 14–15 have been used as described below
(mainly from detective work on the sources).
The bits can be accessed and set by the LEVELS
and
SETLEVELS
macros, which names appear to date back to the internal
factor and ordered types and are now used in only a few places in the
code. The gp
field is serialized/unserialized for the
SEXPTYPE
s other than NILSXP
, SYMSXP
and
ENVSXP
.
Bits 14 and 15 of gp
are used for ‘fancy bindings’. Bit 14 is
used to lock a binding or an environment, and bit 15 is used to indicate
an active binding. (For the definition of an ‘active binding’ see the
header comments in file src/main/envir.c.) Bit 15 is used for an
environment to indicate if it participates in the global cache.
The macros ARGUSED
and SET_ARGUSED
are used when matching
actual and formal function arguments, and take the values 0, 1 and 2.
The macros MISSING
and SET_MISSING
are used for pairlists
of arguments. Four bits are reserved, but only two are used (and
exactly what for is not explained). It seems that bit 0 is used by
matchArgs_NR
to mark missingness on the returned argument list, and
bit 1 is used to mark the use of a default value for an argument copied
to the evaluation frame of a closure.
Bit 0 is used by macros DDVAL
and SET_DDVAL
. This
indicates that a SYMSXP
is one of the symbols ..n
which
are implicitly created when ...
is processed, and so indicates
that it may need to be looked up in a DOTSXP
.
Bit 0 is used for PRSEEN
, a flag to indicate if a promise has
already been seen during the evaluation of the promise (and so to avoid
recursive loops).
Bit 0 is used for HASHASH
, on the PRINTNAME
of the
TAG
of the frame of an environment. (This bit is not serialized
for CHARSXP
objects.)
Bits 0 and 1 are used for weak references (to indicate ‘ready to finalize’, ‘finalize on exit’).
Bit 0 is used by the condition handling system (on a VECSXP
) to
indicate a calling handler.
Bit 4 is turned on to mark S4 objects.
Bits 1, 2, 3, 5 and 6 are used for a CHARSXP
to denote its
encoding. Bit 1 indicates that the CHARSXP
should be treated as
a set of bytes, not necessarily representing a character in any known
encoding. Bits 2, 3 and 6 are used to indicate that it is known to be
in Latin-1, UTF-8 or ASCII respectively.
Bit 5 for a CHARSXP
indicates that it is hashed by its address,
that is NA_STRING
or is in the CHARSXP
cache (this is not
serialized). Only exceptionally is a CHARSXP
not hashed, and
this should never happen in end-user code.
A SEXPREC
is a C structure containing the 64-bit header as
described above, three pointers (to the attributes, previous and next
node) and the node data, a union
union { struct primsxp_struct primsxp; struct symsxp_struct symsxp; struct listsxp_struct listsxp; struct envsxp_struct envsxp; struct closxp_struct closxp; struct promsxp_struct promsxp; } u;
All of these alternatives apart from the first (an int
) are three
pointers, so the union occupies three words.
The vector types are RAWSXP
, CHARSXP
, LGLSXP
,
INTSXP
, REALSXP
, CPLXSXP
, STRSXP
,
VECSXP
, EXPRSXP
and WEAKREFSXP
. Remember that such
types are a VECTOR_SEXPREC
, which again consists of the header
and the same three pointers, but followed by two integers giving the
length and ‘true length’3 of the vector, and then followed by the data
(aligned as required: on most 32-bit systems with a 28-byte
VECTOR_SEXPREC
node the data can follow immediately after the node).
The data are a block of memory of the appropriate length to store ‘true
length’ elements (rounded up to a multiple of 8 bytes, with the 8-byte
blocks being the ‘Vcells’ referred in the documentation for gc()
).
The ‘data’ for the various types are given in the table below. A lot of this is interpretation, i.e. the types are not checked.
NILSXP
There is only one object of type NILSXP
, R_NilValue
, with
no data.
SYMSXP
Pointers to three nodes, the name, value and internal, accessed by
PRINTNAME
(a CHARSXP
), SYMVALUE
and
INTERNAL
. (If the symbol’s value is a .Internal
function,
the last is a pointer to the appropriate SEXPREC
.) Many symbols
have SYMVALUE
R_UnboundValue
.
LISTSXP
Pointers to the CAR, CDR (usually a LISTSXP
or NULL
) and
TAG (a SYMSXP
or NULL
).
CLOSXP
Pointers to the formals (a pairlist), the body and the environment.
ENVSXP
Pointers to the frame, enclosing environment and hash table (NULL
or a
VECSXP
). A frame is a tagged pairlist with tag the symbol and
CAR the bound value.
PROMSXP
Pointers to the value, expression and environment (in which to evaluate
the expression). Once an promise has been evaluated, the environment is
set to NULL
.
LANGSXP
A special type of LISTSXP
used for function calls. (The CAR
references the function (perhaps via a symbol or language object), and
the CDR the argument list with tags for named arguments.) R-level
documentation references to ‘expressions’ / ‘language objects’ are
mainly LANGSXP
s, but can be symbols (SYMSXP
s) or
expression vectors (EXPRSXP
s).
SPECIALSXP
BUILTINSXP
An integer giving the offset into the table of
primitives/.Internal
s.
CHARSXP
length
, truelength
followed by a block of bytes (allowing
for the nul
terminator).
LGLSXP
INTSXP
length
, truelength
followed by a block of C int
s
(which are 32 bits on all R platforms).
REALSXP
length
, truelength
followed by a block of C double
s.
CPLXSXP
length
, truelength
followed by a block of C99 double
complex
s.
STRSXP
length
, truelength
followed by a block of pointers
(SEXP
s pointing to CHARSXP
s).
DOTSXP
A special type of LISTSXP
for the value bound to a ...
symbol: a pairlist of promises.
ANYSXP
This is used as a place holder for any type: there are no actual objects of this type.
VECSXP
EXPRSXP
length
, truelength
followed by a block of pointers. These
are internally identical (and identical to STRSXP
) but differ in
the interpretations placed on the elements.
BCODESXP
For the ‘byte-code’ objects generated by the compiler.
EXTPTRSXP
Has three pointers, to the pointer, the protection value (an R object
which if alive protects this object) and a tag (a SYMSXP
?).
WEAKREFSXP
A WEAKREFSXP
is a special VECSXP
of length 4, with
elements ‘key’, ‘value’, ‘finalizer’ and ‘next’.
The ‘key’ is NULL
, an environment or an external pointer,
and the ‘finalizer’ is a function or NULL
.
RAWSXP
length
, truelength
followed by a block of bytes.
OBJSXP
two unused pointers and a tag.
As we have seen, the field gccls
in the header is three bits to
label up to 8 classes of nodes. Non-vector nodes are of class 0, and
‘small’ vector nodes are of classes 1 to 5, with a class for custom
allocator vector nodes 6 and ‘large’ vector nodes being of class 7. The
‘small’ vector nodes are able to store vector data of up to 8, 16, 32,
64 and 128 bytes: larger vectors are malloc
-ed individually
whereas the ‘small’ nodes are allocated from pages of about 2000
bytes. Vector nodes allocated using custom allocators (via
allocVector3
) are not counted in the GC memory usage statistics
since their memory semantics is not under R’s control and may be
non-standard (e.g., memory could be partially shared across nodes).
What users think of as ‘variables’ are symbols which are bound to
objects in ‘environments’. The word ‘environment’ is used ambiguously
in R to mean either the frame of an ENVSXP
(a pairlist
of symbol-value pairs) or an ENVSXP
, a frame plus an
enclosure.
There are additional places that ‘variables’ can be looked up, called ‘user databases’ in comments in the code. These seem undocumented in the R sources, but apparently refer to the RObjectTable package formerly available at https://www.omegahat.net/RObjectTables/.
The base environment is special. There is an ENVSXP
environment
with enclosure the empty environment R_EmptyEnv
, but the frame of
that environment is not used. Rather its bindings are part of the
global symbol table, being those symbols in the global symbol table
whose values are not R_UnboundValue
. When R is started the
internal functions are installed (by C code) in the symbol table, with
primitive functions having values and .Internal
functions having
what would be their values in the field accessed by the INTERNAL
macro. Then .Platform
and .Machine
are computed and the
base package is loaded into the base environment followed by the system
profile.
The frames of environments (and the symbol table) are normally hashed for faster access (including insertion and deletion).
By default R maintains a (hashed) global cache of ‘variables’ (that
is symbols and their bindings) which have been found, and this refers
only to environments which have been marked to participate, which
consists of the global environment (aka the user workspace), the base
environment plus environments4 which have been attach
ed. When an environment is either
attach
ed or detach
ed, the names of its symbols are flushed
from the cache. The cache is used whenever searching for variables from
the global environment (possibly as part of a recursive search).
S has the notion of a ‘search path’: the lookup for a ‘variable’
leads (possibly through a series of frames) to the ‘session frame’ the
‘working directory’ and then along the search path. The search path is
a series of databases (as returned by search()
) which contain the
system functions (but not necessarily at the end of the path, as by
default the equivalent of packages are added at the end).
R has a variant on the S model. There is a search path (also
returned by search()
) which consists of the global environment
(aka user workspace) followed by environments which have been attached
and finally the base environment. Note that unlike S it is not
possible to attach environments before the workspace nor after the base
environment.
However, the notion of variable lookup is more general in R, hence the plural in the title of this subsection. Since environments have enclosures, from any environment there is a search path found by looking in the frame, then the frame of its enclosure and so on. Since loops are not allowed, this process will eventually terminate: it can terminate at either the base environment or the empty environment. (It can be conceptually simpler to think of the search always terminating at the empty environment, but with an optimization to stop at the base environment.) So the ‘search path’ describes the chain of environments which is traversed once the search reaches the global environment.
Namespaces are environments associated with packages (and once again
the base package is special and will be considered separately). A
package pkg
defines two environments
namespace:pkg
and package:pkg
: it is
package:pkg
that can be attach
ed and form part of
the search path.
The objects defined by the R code in the package are symbols with
bindings in the namespace:pkg
environment. The
package:pkg
environment is populated by selected symbols
from the namespace:pkg
environment (the exports). The
enclosure of this environment is an environment populated with the
explicit imports from other namespaces, and the enclosure of
that environment is the base namespace. (So the illusion of the
imports being in the namespace environment is created via the
environment tree.) The enclosure of the base namespace is the global
environment, so the search from a package namespace goes via the
(explicit and implicit) imports to the standard ‘search path’.
The base namespace environment R_BaseNamespace
is another
ENVSXP
that is special-cased. It is effectively the same thing
as the base environment R_BaseEnv
except that its
enclosure is the global environment rather than the empty environment:
the internal code diverts lookups in its frame to the global symbol
table.
Environments in R usually have a hash table, and nowadays that is the
default in new.env()
. It is stored as a VECSXP
where
length
is used for the allocated size of the table and
truelength
is the number of primary slots in use—the pointer to
the VECSXP
is part of the header of a SEXP
of type
ENVSXP
, and this points to R_NilValue
if the environment
is not hashed.
For the pros and cons of hashing, see a basic text on Computer Science.
The code to implement hashed environments is in src/main/envir.c.
Unless set otherwise (e.g. by the size
argument of
new.env()
) the initial table size is 29
. The table will
be resized by a factor of 1.2 once the load factor (the proportion of
primary slots in use) reaches 85%.
The hash chains are stored as pairlist elements of the VECSXP
:
items are inserted at the front of the pairlist. Hashing is principally
designed for fast searching of environments, which are from time to time
added to but rarely deleted from, so items are not actually deleted but
have their value set to R_UnboundValue
.
As we have seen, every SEXPREC
has a pointer to the attributes of
the node (default R_NilValue
). The attributes can be
accessed/set by the macros/functions ATTRIB
and
SET_ATTRIB
, but such direct access is normally only used to check
if the attributes are NULL
or to reset them. Otherwise access
goes through the functions getAttrib
and setAttrib
which
impose restrictions on the attributes. One thing to watch is that if
you copy attributes from one object to another you may (un)set the
"class"
attribute and so need to copy the object and S4 bits as
well. There is a macro/function DUPLICATE_ATTRIB
to automate
this.
Note that the ‘attributes’ of a CHARSXP
are used as part of the
management of the CHARSXP
cache: of course CHARSXP
’s are
not user-visible but C-level code might look at their attributes.
The code assumes that the attributes of a node are either
R_NilValue
or a pairlist of non-zero length (and this is checked
by SET_ATTRIB
). The attributes are named (via tags on the
pairlist). The replacement function attributes<-
ensures that
"dim"
precedes "dimnames"
in the pairlist. Attribute
"dim"
is one of several that is treated specially: the values are
checked, and any "names"
and "dimnames"
attributes are
removed. Similarly, you cannot set "dimnames"
without having set
"dim"
, and the value assigned must be a list of the correct
length and with elements of the correct lengths (and all zero-length
elements are replaced by NULL
).
The other attributes which are given special treatment are
"names"
, "class"
, "tsp"
, "comment"
and
"row.names"
. For pairlist-like objects the names are not stored
as an attribute but (as symbols) as the tags: however the R interface
makes them look like conventional attributes, and for one-dimensional
arrays they are stored as the first element of the "dimnames"
attribute. The C code ensures that the "tsp"
attribute is an
REALSXP
, the frequency is positive and the implied length agrees
with the number of rows of the object being assigned to. Classes and
comments are restricted to character vectors, and assigning a
zero-length comment or class removes the attribute. Setting or removing
a "class"
attribute sets the object bit appropriately. Integer
row names are converted to and from the internal compact representation.
Care needs to be taken when adding attributes to objects of the types
with non-standard copying semantics. There is only one object of type
NILSXP
, R_NilValue
, and that should never have attributes
(and this is enforced in installAttrib
). For environments,
external pointers and weak references, the attributes should be relevant
to all uses of the object: it is for example reasonable to have a name
for an environment, and also a "path"
attribute for those
environments populated from R code in a package.
When should attributes be preserved under operations on an object?
Becker, Chambers & Wilks (1988, pp. 144–6) give some guidance. Scalar
functions (those which operate element-by-element on a vector and whose
output is similar to the input) should preserve attributes (except
perhaps class, and if they do preserve class they need to preserve the
OBJECT
and S4 bits). Binary operations normally call
copyMostAttrib
to copy most attributes from the longer
argument (and if they are of the same length from both, preferring the
values on the first). Here ‘most’ means all except the names
,
dim
and dimnames
which are set appropriately by the code
for the operator.
Subsetting (other than by an empty index) generally drops all attributes
except names
, dim
and dimnames
which are reset as
appropriate. On the other hand, subassignment generally preserves such
attributes even if the length is changed. Coercion drops all
attributes. For example:
> x <- structure(1:8, names=letters[1:8], comm="a comment") > x[] a b c d e f g h 1 2 3 4 5 6 7 8 attr(,"comm") [1] "a comment" > x[1:3] a b c 1 2 3 > x[3] <- 3 > x a b c d e f g h 1 2 3 4 5 6 7 8 attr(,"comm") [1] "a comment" > x[9] <- 9 > x a b c d e f g h 1 2 3 4 5 6 7 8 9 attr(,"comm") [1] "a comment"
Contexts are the internal mechanism used to keep track of where a
computation has got to (and from where), so that control-flow constructs
can work and reasonable information can be produced on error conditions
(such as via traceback), and otherwise (the sys.xxx
functions).
Execution contexts are a stack of C structs
:
typedef struct RCNTXT { struct RCNTXT *nextcontext; /* The next context up the chain */ int callflag; /* The context ‘type’ */ JMP_BUF cjmpbuf; /* C stack and register information */ int cstacktop; /* Top of the pointer protection stack */ int evaldepth; /* Evaluation depth at inception */ SEXP promargs; /* Promises supplied to closure */ SEXP callfun; /* The closure called */ SEXP sysparent; /* Environment the closure was called from */ SEXP call; /* The call that effected this context */ SEXP cloenv; /* The environment */ SEXP conexit; /* Interpretedon.exit
code */ void (*cend)(void *); /* Con.exit
thunk */ void *cenddata; /* Data for Con.exit
thunk */ char *vmax; /* Top of theR_alloc
stack */ int intsusp; /* Interrupts are suspended */ SEXP handlerstack; /* Condition handler stack */ SEXP restartstack; /* Stack of available restarts */ struct RPRSTACK *prstack; /* Stack of pending promises */ } RCNTXT, *context;
plus additional fields for the byte-code compiler. The ‘types’ are from
enum { CTXT_TOPLEVEL = 0, /* toplevel context */ CTXT_NEXT = 1, /* target fornext
*/ CTXT_BREAK = 2, /* target forbreak
*/ CTXT_LOOP = 3, /*break
ornext
target */ CTXT_FUNCTION = 4, /* function closure */ CTXT_CCODE = 8, /* other functions that need error cleanup */ CTXT_RETURN = 12, /*return()
from a closure */ CTXT_BROWSER = 16, /* return target on exit from browser */ CTXT_GENERIC = 20, /* rather, running an S3 method */ CTXT_RESTART = 32, /* a call torestart
was made from a closure */ CTXT_BUILTIN = 64 /* builtin internal function */ };
where the CTXT_FUNCTION
bit is on wherever function closures are
involved.
Contexts are created by a call to begincontext
and ended by a
call to endcontext
: code can search up the stack for a
particular type of context via findcontext
(and jump there) or
jump to a specific context via R_JumpToContext
.
R_ToplevelContext
is the ‘idle’ state (normally the command
prompt), and R_GlobalContext
is the top of the stack.
Note that whilst calls to closures set a context, internal functions never do and primitive builtins only set it when profiling or when they are interfaces to foreign functions.
The byte-code compiler generates a map of instructions to source references and expressions at compile time, which allows to produce information on error conditions. As an optimization, the byte-code interpreter then does not set a context in some cases, such as in simple loops or when inlining simple builtins or wrappers for internal functions.
Dispatching from a S3 generic (via UseMethod
or its internal
equivalent) or calling NextMethod
sets the context type to
CTXT_GENERIC
. This is used to set the sysparent
of the
method call to that of the generic
, so the method appears to have
been called in place of the generic rather than from the generic.
The R sys.frame
and sys.call
functions work by counting
calls to closures (type CTXT_FUNCTION
) from either end of the
context stack.
Note that the sysparent
element of the structure is not the same
thing as sys.parent()
. Element sysparent
is primarily
used in managing changes of the function being evaluated, i.e. by
Recall
and method dispatch.
CTXT_CCODE
contexts are currently used in cat()
,
load()
, scan()
and write.table()
(to close the
connection on error), by PROTECT
, serialization (to recover from
errors, e.g. free buffers) and within the error handling code (to
raise the C stack limit and reset some variables).
As we have seen, functions in R come in three types, closures
(SEXPTYPE
CLOSXP
), specials (SPECIALSXP
) and
builtins (BUILTINSXP
). In this section we consider when (and if)
the actual arguments of function calls are evaluated. The rules are
different for the internal (special/builtin) and R-level functions
(closures).
For a call to a closure, the actual and formal arguments are matched and
a matched call (another LANGSXP
) is constructed. This process
first replaces the actual argument list by a list of promises to the
values supplied. It then constructs a new environment which contains
the names of the formal parameters matched to actual or default values:
all the matched values are promises, the defaults as promises to be
evaluated in the environment just created. That environment is then
used for the evaluation of the body of the function, and promises will
be forced (and hence actual or default arguments evaluated) when they
are encountered.
(Evaluating a promise sets NAMED = NAMEDMAX
on its value, so if the
argument was a symbol its binding is regarded as having multiple
references during the evaluation of the closure call.)
[The NAMED
mechanism has been replaced by reference counting.]
If the closure is an S3 generic (that is, contains a call to
UseMethod
) the evaluation process is the same until the
UseMethod
call is encountered. At that point the argument on
which to do dispatch (normally the first) will be evaluated if it has
not been already. If a method has been found which is a closure, a new
evaluation environment is created for it containing the matched
arguments. (Note that this means changes to
the values of the formal arguments in the body of the generic are
discarded when calling the method, but actual argument promises
which have been forced retain the values found when they were forced.
On the other hand, missing arguments have values which are promises to
use the default supplied by the method and not by the generic.) If the
method found is a primitive it is called with the matched argument list
of promises (possibly already forced) used for the generic.
The essential difference5 between special and builtin functions is
that the arguments of specials are not evaluated before the C code is
called, and those of builtins are. Note that being a special/builtin is
separate from being primitive or .Internal
: quote
is a
special primitive, +
is a builtin primitive, cbind
is a
special .Internal
and grep
is a builtin .Internal
.
Many of the internal functions are internal generics, which for specials
means that they do not evaluate their arguments on call, but the C code
starts with a call to DispatchOrEval
. The latter evaluates the
first argument, and looks for a method based on its class. (If S4
dispatch is on, S4 methods are looked for first, even for S3 classes.)
If it finds a method, it dispatches to that method with a call based on
promises to evaluate the remaining arguments. If no method is found,
the remaining arguments are evaluated before return to the internal
generic.
The other way that internal functions can be generic is to be group
generic. Most such functions are builtins (so immediately evaluate all
their arguments), and all contain a call to the C function
DispatchGeneric
. There are some peculiarities over the number of
arguments for the "Math"
group generic, with some members
allowing only one argument, some having two (with a default for the
second) and trunc
allows one or more but the default method only
accepts one.
Actual arguments to (non-internal) R functions can be fewer than are required to match the formal arguments of the function. Having unmatched formal arguments will not matter if the argument is never used (by lazy evaluation), but when the argument is evaluated, either its default value is evaluated (within the evaluation environment of the function) or an error is thrown with a message along the lines of
argument "foobar" is missing, with no default
Internally missingness is handled by two mechanisms. The object
R_MissingArg
is used to indicate that a formal argument has no
(default) value. When matching the actual arguments to the formal
arguments, a new argument list is constructed from the formals all of
whose values are R_MissingArg
with the first MISSING
bit
set. Then whenever a formal argument is matched to an actual argument,
the corresponding member of the new argument list has its value set to
that of the matched actual argument, and if that is not
R_MissingArg
the missing bit is unset.
This new argument list is used to form the evaluation frame for the function, and if named arguments are subsequently given a new value (before they are evaluated) the missing bit is cleared.
Missingness of arguments can be interrogated via the missing()
function. An argument is clearly missing if its missing bit is set or
if the value is R_MissingArg
. However, missingness can be passed
on from function to function, for using a formal argument as an actual
argument in a function call does not count as evaluation. So
missing()
has to examine the value (a promise) of a
non-yet-evaluated formal argument to see if it might be missing, which
might involve investigating a promise and so on ….
Special primitives also need to handle missing arguments, and in some
case (e.g. log
) that is why they are special and not
builtin. This is usually done by testing if an argument’s value is
R_MissingArg
.
Dot-dot-dot arguments are convenient when writing functions, but complicate the internal code for argument evaluation.
The formals of a function with a ...
argument represent that as a
single argument like any other argument, with tag the symbol
R_DotsSymbol
. When the actual arguments are matched to the
formals, the value of the ...
argument is of SEXPTYPE
DOTSXP
, a pairlist of promises (as used for matched arguments)
but distinguished by the SEXPTYPE
.
Recall that the evaluation frame for a function initially contains the
name=value
pairs from the matched call, and hence
this will be true for ...
as well. The value of ...
is a
(special) pairlist whose elements are referred to by the special symbols
..1
, ..2
, … which have the DDVAL
bit set:
when one of these is encountered it is looked up (via ddfindVar
)
in the value of the ...
symbol in the evaluation frame.
Values of arguments matched to a ...
argument can be missing.
Special primitives may need to handle ...
arguments: see for
example the internal code of switch
in file
src/main/builtin.c.
Whether the returned value of a top-level R expression is printed is
controlled by the global boolean variable R_Visible
. This is set
(to true or false) on entry to all primitive and internal functions
based on the eval
column of the table in file
src/main/names.c: the appropriate setting can be extracted by the
macro PRIMPRINT
.
The R primitive function invisible
makes use of this
mechanism: it just sets R_Visible = FALSE
before entry and
returns its argument.
For most functions the intention will be that the setting of
R_Visible
when they are entered is the setting used when they
return, but there need to be exceptions. The R functions
identify
, options
, system
and writeBin
determine whether the result should be visible from the arguments or
user action. Other functions themselves dispatch functions which may
change the visibility flag: examples6 are
.Internal
, do.call
, eval
, withVisible
,
if
, NextMethod
, Recall
, recordGraphics
,
standardGeneric
, switch
and UseMethod
.
‘Special’ primitive and internal functions evaluate their arguments
internally after R_Visible
has been set, and evaluation of
the arguments (e.g. an assignment as in PR#9263) can change the value
of the flag.
The R_Visible
flag can also get altered during the evaluation of
a function, with comments in the code about warning
,
writeChar
and graphics functions calling GText
(PR#7397).
(Since the C-level function eval
sets R_Visible
, this
could apply to any function calling it. Since it is called when
evaluating promises, even object lookup can change R_Visible
.)
Internal and primitive functions force the documented setting of
R_Visible
on return, unless the C code is allowed to change it
(the exceptions above are indicated by PRIMPRINT
having value 2).
The actual autoprinting is done by PrintValueEnv
in file
print.c. If the object to be printed has the S4 bit set and S4
methods dispatch is on, show
is called to print the object.
Otherwise, if the object bit is set (so the object has a
"class"
attribute), print
is called to dispatch methods:
for objects without a class the internal code of print.default
is called.
R has long had a generational garbage collector, and bit gcgen
in the sxpinfo
header is used in the implementation of this.
This is used in conjunction with the mark
bit to identify two
previous generations.
There are three levels of collections. Level 0 collects only the
youngest generation, level 1 collects the two youngest generations and
level 2 collects all generations. After 20 level-0 collections the next
collection is at level 1, and after 5 level-1 collections at level 2.
Further, if a level-n collection fails to provide 20% free space
(for each of nodes and the vector heap), the next collection will be at
level n+1. (The R-level function gc()
performs a
level-2 collection.)
A generational collector needs to efficiently ‘age’ the objects,
especially list-like objects (including STRSXP
s). This is done
by ensuring that the elements of a list are regarded as at least as old
as the list when they are assigned. This is handled by the
functions SET_VECTOR_ELT
and SET_STRING_ELT
, which is why
they are functions and not macros. Ensuring the integrity of such
operations is termed the write barrier and is done by making the
SEXP
opaque and only providing access via functions (which cannot
be used as lvalues in assignments in C).
All code in R extensions is behind the write barrier. R
extensions cannot directly access the internals of the SEXPREC
s.
Base code can access internals if ‘USE_RINTERNALS’ is defined.
This is normally defined in Defn.h when R is compiled. To
enable a check on the way that the access is used, R can be compiled
with flag --enable-strict-barrier which ensures that header
Defn.h does not define ‘USE_RINTERNALS’ and hence that
SEXP
is opaque in most of R itself. (There are some necessary
exceptions: foremost in file memory.c where the accessor
functions are defined and also in file size.c which needs access
to the sizes of the internal structures.)
For background papers see https://homepage.stat.uiowa.edu/~luke/R/barrier.html and https://homepage.stat.uiowa.edu/~luke/R/gengcnotes.html.
Serialized versions of R objects are used by load
/save
and also at a slightly lower level by saveRDS
/readRDS
(and
their earlier ‘internal’ dot-name versions) and
serialize
/unserialize
. These differ in what they
serialize to (a file, a connection, a raw vector) and whether they are
intended to serialize a single object or a collection of objects
(typically the workspace). save
writes a header at the beginning
of the file (a single LF-terminated line) which the lower-level versions
do not.
save
and saveRDS
allow various forms of compression, and
gzip
compression is the default (except for ASCII
saves). Compression is applied to the whole file stream, including the
headers, so serialized files can be uncompressed or re-compressed by
external programs. Both load
and readRDS
can read
gzip
, bzip2
and xz
forms of compression
when reading from a file, and gzip
compression when reading
from a connection.
R has used the same serialization format called ‘version 2’ from R
1.4.0 in December 2001 until R 3.5.3 in March 2019. It has been expanded
in back-compatible ways since its inception, for example to support
additional SEXPTYPE
s. Earlier formats are still supported via
load
and save
but such formats are not described here. The
current default serialization format is called ‘version 3’, and has been
introduced in R 3.5.0.
save
works by writing a single-line header (typically
RDX2\n
for a binary save: the only other current value is
RDA2\n
for save(files=TRUE)
), then creating a tagged
pairlist of the objects to be saved and serializing that single object.
load
reads the header line, unserializes a single object (a
pairlist or a vector list) and assigns the elements of the object in the
specified environment. The header line serves two purposes in R: it
identifies the serialization format so load
can switch to the
appropriate reader code, and the newline \n
allows the detection of files
which have been subjected to a non-binary transfer which re-mapped line
endings. It can also be thought of as a ‘magic number’ in the sense
used by the file
program (although R save files are not yet
by default known to that program).
Serialization in R needs to take into account that objects may contain references to environments, which then have enclosing environments and so on. (Environments recognized as package or name space environments are saved by name.) There are ‘reference objects’ which are not duplicated on copy and should remain shared on unserialization. These are weak references, external pointers and environments other than those associated with packages, namespaces and the global environment. These are handled via a hash table, and references after the first are written out as a reference marker indexed by the table entry.
Version-2 serialization first writes a header indicating the format
(normally ‘X\n’ for an XDR format binary save, but ‘A\n’,
ASCII, and ‘B\n’, native word-order binary, can also occur) and
then three integers giving the version of the format and two R
versions (packed by the R_Version
macro from Rversion.h).
(Unserialization interprets the two versions as the version of R
which wrote the file followed by the minimal version of R needed to
read the format.) Serialization then writes out the object recursively
using function WriteItem
in file src/main/serialize.c.
Some objects are written as if they were SEXPTYPE
s: such
pseudo-SEXPTYPE
s cover R_NilValue
, R_EmptyEnv
,
R_BaseEnv
, R_GlobalEnv
, R_UnboundValue
,
R_MissingArg
and R_BaseNamespace
.
For all SEXPTYPE
s except NILSXP
, SYMSXP
and
ENVSXP
serialization starts with an integer with the
SEXPTYPE
in bits 0:77 followed by the object bit, two bits
indicating if there are any attributes and if there is a tag (for the
pairlist types), an unused bit and then the gp
field8 in
bits 12:27. Pairlist-like objects write their attributes (if any), tag
(if any), CAR and then CDR (using tail recursion): other objects write
their attributes after themselves. Atomic vector objects write their
length followed by the data: generic vector-list objects write their
length followed by a call to WriteItem
for each element. The
code for CHARSXP
s special-cases NA_STRING
and writes it as
length -1
with no data. Lengths no more than 2^31 - 1
are
written in that way and larger lengths (which only occur on 64-bit
systems) as -1
followed by the upper and lower 32-bits as integers
(regarded as unsigned).
Environments are treated in several ways: as we have seen, some are
written as specific pseudo-SEXPTYPE
s. Package and namespace
environments are written with pseudo-SEXPTYPE
s followed by the
name. ‘Normal’ environments are written out as ENVSXP
s with an
integer indicating if the environment is locked followed by the
enclosure, frame, ‘tag’ (the hash table) and attributes.
In the ‘XDR’ format integers and doubles are written in big-endian order:
however the format is not fully XDR (as defined in RFC 1832) as byte
quantities (such as the contents of CHARSXP
and RAWSXP
types) are written as-is and not padded to a multiple of four bytes.
The ‘ASCII’ format writes 7-bit characters. Integers are formatted with
%d
(except that NA_integer_
is written as NA
),
doubles formatted with %.16g
(plus NA
, Inf
and
-Inf
) and bytes with %02x
. Strings are written using
standard escapes (e.g. \t
and \013
) for non-printing and
non-ASCII bytes.
Version-3 serialization extends version-2 by support for custom
serialization of ALTREP
framework objects. It also stores the
current native encoding at serialization time, so that unflagged strings can
be converted if unserialized in R running under different native encoding.
CHARSXP
s ¶Character data in R are stored in the SEXPTYPE
CHARSXP
.
There is support for encodings other than that of the current locale, in
particular UTF-8 and the multi-byte encodings used on Windows for CJK
languages. A limited means to indicate the encoding of a CHARSXP
is via two of the ‘general purpose’ bits which are used to declare
the encoding to be either Latin-1 or UTF-8. (Note that it is possible
for a character vector to contain elements in different encodings.)
Both printing and plotting notice the declaration and convert the string
to the current locale (possibly using <xx>
to display in
hexadecimal bytes that are not valid in the current locale). Many (but
not all) of the character manipulation functions will either preserve
the declaration or re-encode the character string.
Strings that refer to the OS such as file names need to be passed through a wide-character interface on some OSes (e.g. Windows).
When are character strings declared to be of known encoding? One way is
to do so directly via Encoding
. The parser declares the encoding
if this is known, either via the encoding
argument to
parse
or from the locale within which parsing is being done at
the R command line. (Other ways are recorded on the help page for
Encoding
.)
It is not necessary to declare the encoding of ASCII strings
as they will work in any locale. ASCII strings should never
have a marked encoding, as any encoding will be ignored when entering
such strings into the CHARSXP
cache.
The rationale behind considering only UTF-8 and Latin-1 was that most
systems are capable of producing UTF-8 strings and this is the nearest
we have to a universal format. For those that do not (for example those
lacking a powerful enough iconv
), it is likely that they work in
Latin-1, the old R assumption. Then the parser can return a
UTF-8-encoded string if it encounters a ‘\uxxxx’ escape for a
Unicode point that cannot be represented in the current charset. (This
needs MBCS support, and in the past was only enabled9 on
Windows.) Now this is enabled for all platforms, and a ‘\uxxxx’ or
‘\Uxxxxxxxx’ escape ensures that the parsed string will be marked
as UTF-8.
Most of the character manipulation functions now preserve UTF-8 encodings: there are some notes as to which at the top of file src/main/character.c and in file src/library/base/man/Encoding.Rd.
Graphics devices are offered the possibility of handing UTF-8-encoded
strings without re-encoding to the native character set, by setting
hasTextUTF8
to be ‘TRUE’ and supplying functions
textUTF8
and strWidthUTF8
that expect UTF-8-encoded
inputs. Normally the symbol font is encoded in Adobe Symbol encoding,
but that can be re-encoded to UTF-8 by setting wantSymbolUTF8
to
‘TRUE’. The Windows’ port of cairographics has a rather peculiar
assumption: it wants the symbol font to be encoded in UTF-8 as if it
were encoded in Latin-1 rather than Adobe Symbol: this is selected by
wantSymbolUTF8 = NA_LOGICAL
.
Windows with MSVCRT as the C runtime has no UTF-8 locales, but rather expects to work with
UCS-210
strings. R (being written in standard C) would not work internally
with UCS-2 without extensive changes. The Rgui
console11 uses UCS-2 internally,
but communicates with the R engine in the native encoding. To allow
UTF-8 strings to be printed in UTF-8 in Rgui.exe, an escape
convention is used (see header file rgui_UTF8.h) by
cat
, print
and autoprinting.
‘Unicode’ (UCS-2LE) files are common in the Windows world, and
readLines
and scan
will read them into UTF-8 strings on
Windows if the encoding is declared explicitly on an unopened
connection passed to those functions.
Windows have multiple notions of the current locale encoding, one is in the C runtime (C library) and another is the active code page (system locale). The active code page is used when calling non-UTF-16 variants of Windows API functions (earlier referred to as ANSI calls), either directly or indirectly via POSIX wrappers inside MinGW-w64, from R, R packages and libraries they link to. While R has handled many cases by calling directly the UTF-16 variants of the Windows API, it still may sometimes use the non-UTF-16 ones, and external libraries also primarily developed for POSIX systems typically do that. Therefore, for R to reliably work with (non-ASCII) strings on Windows, both the C locale encoding and the active code page on Windows must be the same, and by default they are.
The Windows UCRT C runtime supports UTF-8 locales. Historically, the active code page was a system-wide setting, changing which required a reboot, and UTF-8 was not supported. Later a "BETA: Use Unicode UTF-8 for worldwide language support" feature has been added to set the active code page to UTF-8, but this still required a reboot and impacted all applications, many of which would not work correctly with that unexpected setting, so it could not be used in practice.
Windows since Windows 10 (version 1903), Windows Server 2022 (LTSC), and Windows Server 1903 (semi-annual channel) allow setting the active code page to UTF-8 in the application manifest. This changes the active code page only for the given application and does so together with changing also the UCRT C locale to UTF-8. R 4.2 for Windows uses this feature to get UTF-8 as the native encoding on Windows. To make that possible, R had to switch to UCRT, which in turn required creation of Rtools42.
Older versions of Windows still rely on the previous encoding support where the native encoding cannot be UTF-8. R 4.2 requires UCRT to work, but UCRT can be installed on Windows since Vista SP2 and Windows Server 2008 SP2. It is shipped with Windows since Windows 10 and Windows Server 2016.
CHARSXP
cache ¶There is a global cache for CHARSXP
s created by mkChar
—
the cache ensures that most CHARSXP
s with the same contents share
storage (‘contents’ including any declared encoding). Not all
CHARSXP
s are part of the cache – notably ‘NA_STRING’ is
not. CHARSXP
s reloaded from the save
formats of R prior
to 0.99.0 are not cached (since the code used is frozen and very few
examples still exist).
The cache records the encoding of the string as well as the bytes: all
requests to create a CHARSXP
should be via a call to
mkCharLenCE
. Any encoding given in mkCharLenCE
call will
be ignored if the string’s bytes are all ASCII characters.
Each of warning
and stop
have two C-level equivalents,
warning
, warningcall
, error
and errorcall
.
The relationship between the pairs is similar: warning
tries to
fathom out a suitable call, and then calls warningcall
with that
call as the first argument if it succeeds, and with call =
R_NilValue
if it does not. When warningcall
is called, it
includes the deparsed call in its printout unless call =
R_NilValue
.
warning
and error
look at the context stack. If the
topmost context is not of type CTXT_BUILTIN
, it is used to
provide the call, otherwise the next context provides the call.
This means that when these functions are called from a primitive or
.Internal
, the imputed call will not be to
primitive/.Internal
but to the function calling the
primitive/.Internal
. This is exactly what one wants for a
.Internal
, as this will give the call to the closure wrapper.
(Further, for a .Internal
, the call is the argument to
.Internal
, and so may not correspond to any R function.)
However, it is unlikely to be what is needed for a primitive.
The upshot is that warningcall
and errorcall
should
normally be used for code called from a primitive, and warning
and error
should be used for code called from a .Internal
(and necessarily from .Call
, .C
and so on, where the call
is not passed down). However, there are two complications. One is that
code might be called from either a primitive or a .Internal
, in
which case probably warningcall
is more appropriate. The other
involves replacement functions, where the call was once of the form
> length(x) <- y ~ x Error in "length<-"(`*tmp*`, value = y ~ x) : invalid value
which is unpalatable to the end user. For replacement functions there
will be a suitable context at the top of the stack, so warning
should be used. (The results for .Internal
replacement functions
such as substr<-
are not ideal.)
[This section is currently a preliminary draft and should not be taken
as definitive. The description assumes that R_NO_METHODS_TABLES
has not been set.]
S4 objects can be of any SEXPTYPE
. They are either an object of
a simple type (such as an atomic vector or function) with S4 class
information or of type OBJSXP
. In all cases, the ‘S4 bit’ (bit 4
of the ‘general purpose’ field) is set, and can be tested by the
macro/function IS_S4_OBJECT
.
S4 objects are created via new()
12 and thence via the C
function R_do_new_object
. This duplicates the prototype of the
class, adds a class attribute and sets the S4 bit. All S4 class
attributes should be character vectors of length one with an attribute
giving (as a character string) the name of the package (or
.GlobalEnv
) containing the class definition. Since S4 objects
have a class attribute, the OBJECT
bit is set.
It is currently unclear what should happen if the class attribute is removed from an S4 object, or if this should be allowed.
S4 classes are stored as R objects in the environment in which they
are created, with names .__C__classname
: as such they are
not listed by default by ls
.
The objects are S4 objects of class "classRepresentation"
which
is defined in the methods package.
Since these are just objects, they are subject to the normal scoping
rules and can be imported and exported from namespaces like other
objects. The directives importClassesFrom
and
exportClasses
are merely convenient ways to refer to class
objects without needing to know their internal ‘metaname’ (although
exportClasses
does a little sanity checking via isClass
).
Details of the methods are stored in environments (typically hidden in the
respective namespace) with a non-syntactic name of the form
.__T__generic:package
containing objects of class
MethodDefinition
for all methods defined in the current environment
for the named generic derived from a specific package (which might be .GlobalEnv
).
This is sometimes referred to as a ‘methods table’.
For example,
length(nM <- asNamespace("Matrix") ) # 941 for Matrix 1.2-6 length(meth <- grep("^[.]__T__", names(nM), value=TRUE))# 107 generics with methods length(meth.Ops <- nM$`.__T__Ops:base`) # 71 methods for the 'Ops' (group)generic head(sort(names(meth.Ops))) ## "abIndex#abIndex" ... "ANY#ddiMatrix" "ANY#ldiMatrix" "ANY#Matrix"
During an R session there is an environment associated with each
non-primitive generic containing objects .AllMTable
,
.Generic
, .Methods
, .MTable
, .SigArgs
and
.SigLength
. .MTable
and AllMTable
are merged
methods tables containing all the methods defined directly and via
inheritance respectively. .Methods
is a merged methods list.
Exporting methods from a namespace is more complicated than exporting a
class. Note first that you do not export a method, but rather the
directive exportMethods
will export all the methods defined in
the namespace for a specified generic: the code also adds to the list
of generics any that are exported directly. For generics which are
listed via exportMethods
or exported themselves, the
corresponding environment is exported and so
will appear (as hidden object) in the package environment.
Methods for primitives which are internally S4 generic (see below) are always exported, whether mentioned in the NAMESPACE file or not.
Methods can be imported either via the directive
importMethodsFrom
or via importing a namespace by import
.
Also, if a generic is imported via importFrom
, its methods are
also imported. In all cases the generic will be imported if it is in
the namespace, so importMethodsFrom
is most appropriate for
methods defined on generics in other packages. Since methods for a
generic could be imported from several different packages, the methods
tables are merged.
When a package is attached
methods:::cacheMetaData
is called to update the internal tables:
only the visible methods will be cached.
This subsection does not discuss how S4 methods are chosen: see https://developer.r-project.org/howMethodsWork.pdf.
For all but primitive functions, setting a method on an existing
function that is not itself S4 generic creates a new object in the
current environment which is a call to standardGeneric
with the
old definition as the default method. Such S4 generics can also be
created via a call to setGeneric
13 and are standard closures
in the R language, with environment the environment within which they
are created. With the advent of namespaces this is somewhat
problematic: if myfn
was previously in a package with a name
space there will be two functions called myfn
on the search
paths, and which will be called depends on which search path is in use.
This is starkest for functions in the base namespace, where the
original will be found ahead of the newly created function from any
other package.
Primitive functions are treated quite differently, for efficiency
reasons: this results in different semantics. setGeneric
is
disallowed for primitive functions. The methods namespace
contains a list .BasicFunsList
named by primitive functions:
the entries are either FALSE
or a standard S4 generic showing
the effective definition. When setMethod
(or
setReplaceMethod
) is called, it either fails (if the list entry
is FALSE
) or a method is set on the effective generic given in
the list.
Actual dispatch of S4 methods for almost all primitives piggy-backs on
the S3 dispatch mechanism, so S4 methods can only be dispatched for
primitives which are internally S3 generic. When a primitive that is
internally S3 generic is called with a first argument which is an S4
object and S4 dispatch is on (that is, the methods namespace is
loaded), DispatchOrEval
calls R_possible_dispatch
(defined
in file src/main/objects.c). (Members of the S3 group generics,
which includes all the generic operators, are treated slightly
differently: the first two arguments are checked and
DispatchGroup
is called.) R_possible_dispatch
first
checks an internal table to see if any S4 methods are set for that
generic (and S4 dispatch is currently enabled for that generic), and if
so proceeds to S4 dispatch using methods stored in another internal
table. All primitives are in the base namespace, and this mechanism
means that S4 methods can be set for (some) primitives and will always
be used, in contrast to setting methods on non-primitives.
The exception is %*%
, which is S4 generic but not S3 generic as
its C code contains a direct call to R_possible_dispatch
.
The primitive as.double
is special, as as.numeric
and
as.real
are copies of it. The methods package code partly
refers to generics by name and partly by function, and maps
as.double
and as.real
to as.numeric
(since that is
the name used by packages exporting methods for it).
Some elements of the language are implemented as primitives, for example
}
. This includes the subset and subassignment ‘functions’ and
they are S4 generic, again piggybacking on S3 dispatch.
.BasicFunsList
is generated when methods is installed, by
computing all primitives, initially disallowing methods on all and then
setting generics for members of .GenericArgsEnv
, the S4 group
generics and a short exceptions list in file BasicFunsList.R: this
currently contains the subsetting and subassignment operators and an
override for c
.
R’s memory allocation is almost all done via routines in file src/main/memory.c.
The rest of R should where possible make use of the allocators made
available by file src/main/memory.c, which are also the methods
recommended in
Memory allocation in Writing R Extensions
for use in R packages, namely the use of R_alloc
,
R_Calloc
, R_Realloc
and R_Free
. Memory allocated by
R_alloc
is freed by the garbage collector once the ‘watermark’
has been reset by calling
vmaxset
. This is done automatically by the wrapper code calling
primitives and .Internal
functions (and also by the wrapper code
to .Call
and .External
), but
vmaxget
and vmaxset
can be used to reset the watermark
from within internal code if the memory is only required for a short
time.
All of the methods of memory allocation mentioned so far are relatively
expensive. All R platforms support alloca
, and in almost all
cases14 this is managed by the
compiler, allocates memory on the C stack and is very efficient.
There are two disadvantages in using alloca
. First, it is
fragile and care is needed to avoid writing (or even reading) outside
the bounds of the allocation block returned. Second, it increases the
danger of overflowing the C stack. It is suggested that it is only
used for smallish allocations (up to tens of thousands of bytes), and
that
R_CheckStack();
is called immediately after the allocation (as R’s stack checking
mechanism will warn far enough from the stack limit to allow for modest
use of alloca
). (do_makeunique
in file src/main/unique.c
provides an example of both points.)
There is an alternative check,
R_CheckStack2(size_t extra);
to be called immediately before trying an allocation of
extra
bytes.
An alternative strategy has been used for various functions which require intermediate blocks of storage of varying but usually small size, and this has been consolidated into the routines in the header file src/main/RBufferUtils.h. This uses a structure which contains a buffer, the current size and the default size. A call to
R_AllocStringBuffer(size_t blen, R_StringBuffer *buf);
sets buf->data
to a memory area of at least blen+1
bytes.
At least the default size is used, which means that for small
allocations the same buffer can be reused. A call to
R_FreeStringBufferL
releases memory if more than the default has
been allocated whereas a call to R_FreeStringBuffer
frees any
memory allocated.
The R_StringBuffer
structure needs to be initialized, for example by
static R_StringBuffer ex_buff = {NULL, 0, MAXELTSIZE};
which uses a default size of MAXELTSIZE = 8192
bytes. Most
current uses have a static R_StringBuffer
structure, which
allows the (default-sized) buffer to be shared between calls to e.g.
grep
and even between functions: this will need to be changed if
R ever allows concurrent evaluation threads. So the idiom is
static R_StringBuffer ex_buff = {NULL, 0, MAXELTSIZE}; ... char *buf; for(i = 0; i < n; i++) { compute len buf = R_AllocStringBuffer(len, &ex_buff); use buf } /* free allocation if larger than the default, but leave default allocated for future use */ R_FreeStringBufferL(&ex_buff);
R_alloc
¶The memory used by R_alloc
is allocated as R vectors, of type
RAWSXP
. Thus the allocation is in units of 8 bytes, and is
rounded up. A request for zero bytes currently returns NULL
(but
this should not be relied on). For historical reasons, in all other
cases 1 byte is added before rounding up so the allocation is always
1–8 bytes more than was asked for: again this should not be relied on.
The vectors allocated are protected via the setting of R_VStack
,
as the garbage collector marks everything that can be reached from that
location. When a vector is R_alloc
ated, its ATTRIB
pointer is set to the current R_VStack
, and R_VStack
is
set to the latest allocation. Thus R_VStack
is a single-linked
chain of the vectors currently allocated via R_alloc
. Function
vmaxset
resets the location R_VStack
, and should be to a
value that has previously be obtained via vmaxget
:
allocations after the value was obtained will no longer be protected and
hence available for garbage collection.
This section notes known use by the system of these environments: the intention is to minimize or eliminate such uses.
The graphics devices system maintains two variables .Device
and
.Devices
in the base environment: both are always set. The
variable .Devices
gives a list of character vectors of the names
of open devices, and .Device
is the element corresponding to the
currently active device. The null device will always be open.
There appears to be a variable .Options
, a pairlist giving the
current options settings. But in fact this is just a symbol with a
value assigned, and so shows up as a base variable.
Similarly, the evaluator creates a symbol .Last.value
which
appears as a variable in the base environment.
Errors can give rise to objects .Traceback
and
last.warning
in the base environment.
The seed for the random number generator is stored in object
.Random.seed
in the global environment.
Some error handlers may give rise to objects in the global environment:
for example dump.frames
by default produces last.dump
.
The windows()
device makes use of a variable .SavedPlots
to store display lists of saved plots for later display. This is
regarded as a variable created by the user.
R makes use of a number of shared objects/DLLs stored in the modules directory. These are parts of the code which have been chosen to be loaded ‘on demand’ rather than linked as dynamic libraries or incorporated into the main executable/dynamic library.
For the remaining modules the motivation has been the amount of (often optional) code they will bring in via libraries to which they are linked.
internet
The internal HTTP and FTP clients and socket support, which link to
system-specific support libraries. This may load libcurl
and on
Windows will load wininet.dll and ws2_32.dll.
lapack
The code which makes use of the LAPACK library, and is linked to libRlapack or an external LAPACK library.
X11
(Unix-alikes only.) The X11()
, jpeg()
, png()
and
tiff()
devices. These are optional, and links to some or all of
the X11
, pango
, cairo
, jpeg
, libpng
and libtiff
libraries.
We make use of the visibility mechanisms discussed in
Controlling visibility in Writing R Extensions.
C entry points not needed outside the main R executable/dynamic
library (and in particular in no package nor module) should be prefixed
by attribute_hidden
.
Minimizing the visibility of symbols in the R dynamic library will
speed up linking to it (which packages will do) and reduce the
possibility of linking to the wrong entry points of the same name. In
addition, on some platforms reducing the number of entry points allows
more efficient versions of PIC to be used: somewhat over half the entry
points are hidden. A convenient way to hide variables (as distinct from
functions) is to declare them extern0
in header file Defn.h.
The visibility mechanism used is only available with some compilers and
platforms, and in particular not on Windows, where an alternative
mechanism is used. Entry points will not be made available in
R.dll if they are listed in the file
src/gnuwin32/Rdll.hide.
Entries in that file start with a space and must be strictly in
alphabetic order in the C locale (use sort
on the file to
ensure this if you change it). It is possible to hide Fortran as well
as C entry points via this file: the former are lower-cased and have an
underline as suffix, and the suffixed name should be included in the
file. Some entry points exist only on Windows or need to be visible
only on Windows, and some notes on these are provided in file
src/gnuwin32/Maintainters.notes.
Because of the advantages of reducing the number of visible entry
points, they should be declared attribute_hidden
where possible.
Note that this only has an effect on a shared-R-library build, and so
care is needed not to hide entry points that are legitimately used by
packages. So it is best if the decision on visibility is made when a
new entry point is created, including the decision if it should be
included in header file Rinternals.h. A list of the visible
entry points on shared-R-library build on a reasonably standard
Unix-alike can be made by something like
nm -g libR.so | grep ' [BCDT] ' | cut -b20-
Windows is unique in that it conventionally treats importing variables differently from functions: variables that are imported from a DLL need to be specified by a prefix (often ‘_imp_’) when being linked to (‘imported’) but not when being linked from (‘exported’). The details depend on the compiler system, and have changed for MinGW during the lifetime of that port. They are in the main hidden behind some macros defined in header file R_ext/libextern.h.
A (non-function) variable in the main R sources that needs to be
referred to outside R.dll (in a package, module or another DLL
such as Rgraphapp.dll) should be declared with prefix
LibExtern
. The main use is in Rinternals.h, but it needs
to be considered for any public header and also Defn.h.
It would nowadays be possible to make use of the ‘auto-import’ feature
of the MinGW port of ld
to fix up imports from DLLs (and if
R is built for the Cygwin platform this is what happens). However,
this was not possible when the MinGW build of R was first constructed
in ca 1998, allows less control of visibility and would not work for
other Windows compiler suites.
It is only possible to check if this has been handled correctly by compiling the R sources on Windows.
Lazy loading is always used for code in packages but is optional (selected by the package maintainer) for datasets in packages. When a package/namespace which uses it is loaded, the package/namespace environment is populated with promises for all the named objects: when these promises are evaluated they load the actual code from a database.
There are separate databases for code and data, stored in the R
and data subdirectories. The database consists of two files,
name.rdb and name.rdx. The .rdb file
is a concatenation of serialized objects, and the .rdx file
contains an index. The objects are stored in (usually) a
gzip
-compressed format with a 4-byte header giving the
uncompressed serialized length (in XDR, that is big-endian, byte order)
and read by a call to the primitive lazyLoadDBfetch
. (Note that
this makes lazy-loading unsuitable for really large objects: the
unserialized length of an R object can exceed 4GB.)
The index or ‘map’ file name.rdx is a compressed serialized
R object to be read by readRDS
. It is a list with three
elements variables
, references
and compressed
. The
first two are named lists of integer vectors of length 2 giving the
offset and length of the serialized object in the name.rdb
file. Element variables
has an entry for each named object:
references
serializes a temporary environment used when named
environments are added to the database. compressed
is a logical
indicating if the serialized objects were compressed: compression is
always used nowadays. We later added the values compressed = 2
and 3
for bzip2
and xz
compression (with the
possibility of future expansion to other methods): these formats add a
fifth byte to the header for the type of compression, and store
serialized objects uncompressed if compression expands them.
Source references are treated specially for performance reasons: bindings
lines
and parseData
from srcfile
environments are
loaded lazily. This uses a mechanism that allows loading selected bindings
from an environment lazily. The key for such environment is a list with two
elements: eagerKey
gives the length-two integer key for the bindings
loaded eagerly and lazyKeys
gives a vector of length-two integer
keys, one for each lazily loaded binding.
The loader for a lazy-load database of code or data is function
lazyLoad
in the base package, but note that there is a
separate copy to load base itself in file
R_HOME/base/R/base.
Lazy-load databases are created by the code in
src/library/tools/R/makeLazyLoad.R: the main tool is the
unexported function makeLazyLoadDB
and the insertion of database
entries is done by calls to .Call("R_lazyLoadDBinsertValue",
...)
.
Lazy-load databases of less than 10MB are cached in memory at first use: this was found necessary when using file systems with high latency (removable devices and network-mounted file systems on Windows).
Lazy-load databases are loaded into the exports for a package, but not
into the namespace environment itself. Thus they are visible when the
package is attached, and also via the ::
operator.
This was a deliberate design decision, as packages mostly make datasets
available for use by the end user (or other packages), and they should
not be found preferentially from functions in the package, surprising
users who expected the normal search path to be used. (There is an
alternative mechanism, sysdata.rda, for ‘system datasets’ that
are intended primarily to be used within the package.)
The same database mechanism is used to store parsed Rd files.
One or all of the parsed objects is fetched by a call to
tools:::fetchRdDB
.
.Internal
vs .Primitive
¶C code compiled into R at build time can be called directly in what
are termed primitives or via the .Internal
interface,
which is very similar to the .External
interface except in
syntax. More precisely, R maintains a table of R function names and
corresponding C functions to call, which by convention all start with
‘do_’ and return a SEXP
. This table (R_FunTab
in
file src/main/names.c) also specifies how many arguments to a
function are required or allowed, whether or not the arguments are to be
evaluated before calling, and whether the function is ‘internal’ in
the sense that it must be accessed via the .Internal
interface,
or directly accessible in which case it is printed in R as
.Primitive
.
Functions using .Internal()
wrapped in a closure are in general
preferred as this ensures standard handling of named and default
arguments. For example, grep
is defined as
grep <- function (pattern, x, ignore.case = FALSE, perl = FALSE, value = FALSE, fixed = FALSE, useBytes = FALSE, invert = FALSE) { if (!is.character(x)) x <- structure(as.character(x), names = names(x)) .Internal(grep(as.character(pattern), x, ignore.case, value, perl, fixed, useBytes, invert)) }
and the use of as.character
allows methods to be dispatched (for
example, for factors).
However, for reasons of convenience and also efficiency (as there is
some overhead in using the .Internal
interface wrapped in a
function closure), the primitive functions are exceptions that can be
accessed directly. And of course, primitive functions are needed for
basic operations—for example .Internal
is itself a primitive.
Note that primitive functions make no use of R code, and hence are
very different from the usual interpreted functions. In particular,
formals
and body
return NULL
for such objects, and
argument matching can be handled differently. For some primitives
(including call
, switch
, .C
and .subset
)
positional matching is important to avoid partial matching of the first
argument.
The list of primitive functions is subject to change; currently, it includes the following.
{ ( if for while repeat break next return function quote switch
foo(a, b, ...)
) for subsetting, assignment,
arithmetic, comparison and logic:
[ [[ $ @ <- <<- = [<- [[<- $<- @<- + - * / ^ %% %*% %/% < <= == != >= > | || & && !
When the arithmetic, comparison and logical operators are called as functions, any argument names are discarded so positional matching is used.
abs sign sqrt floor ceiling
exp expm1 log2 log10 log1p cos sin tan acos asin atan cosh sinh tanh acosh asinh atanh cospi sinpi tanpi
gamma lgamma digamma trigamma
cumsum cumprod cummax cummin
Im Re Arg Conj Mod
log
is a primitive function of one or two arguments with named
argument matching.
trunc
is a difficult case: it is a primitive that can have one
or more arguments: the default method handled in the primitive has
only one.
nargs missing on.exit interactive as.call as.character as.complex as.double as.environment as.integer as.logical as.raw is.array is.atomic is.call is.character is.complex is.double is.environment is.expression is.finite is.function is.infinite is.integer is.language is.list is.logical is.matrix is.na is.name is.nan is.null is.numeric is.object is.pairlist is.raw is.real is.recursive is.single is.symbol baseenv emptyenv globalenv pos.to.env unclass invisible seq_along seq_len
browser proc.time gc.time tracemem retracemem untracemem
length length<- class class<- oldClass oldClass<- attr attr<- attributes attributes<- names names<- dim dim<- dimnames dimnames<- environment<- levels<- storage.mode<-
Note that optimizing NAMED = 1
is only effective within a
primitive (as the closure wrapper of a .Internal
will set
NAMED = NAMEDMAX
when the promise to the argument is evaluated) and
hence replacement functions should where possible be primitive to avoid
copying (at least in their default methods).
[The NAMED
mechanism has been replaced by reference counting.]
: ~ c list call expression substitute UseMethod standardGeneric .C .Fortran .Call .External round signif rep seq.int
as well as the following internal-use-only functions
.Primitive .Internal .Call.graphics .External.graphics .subset .subset2 .primTrace .primUntrace lazyLoadDBfetch
The multi-argument primitives
call switch .C .Fortran .Call .External
intentionally use positional matching, and need to do so to avoid partial matching to their first argument. They do check that the first argument is unnamed or for the first two, partially matches the formal argument name. On the other hand,
attr attr<- browser rememtrace substitute UseMethod log round signif rep seq.int
manage their own argument matching and do work in the standard way.
All the one-argument primitives check that if they are called with a
named argument that this (partially) matches the name given in the
documentation: this is also done for replacement functions with one
argument plus value
.
The net effect is that argument matching for primitives intended for end-user use as functions is done in the same way as for interpreted functions except for the six exceptions where positional matching is required.
A small number of primitives are specials rather than
builtins, that is they are entered with unevaluated arguments.
This is clearly necessary for the language constructs and the assignment
operators, as well as for &&
and ||
which conditionally
evaluate their second argument, and ~
, .Internal
,
call
, expression
, missing
, on.exit
,
quote
and substitute
which do not evaluate some of their
arguments.
rep
and seq.int
are special as they evaluate some of their
arguments conditional on which are non-missing.
log
, round
and signif
are special to allow default
values to be given to missing arguments.
The subsetting, subassignment and @
operators are all special.
(For both extraction and replacement forms, $
and @
take a symbol argument, and [
and [[
allow missing
arguments.)
UseMethod
is special to avoid the additional contexts added to
calls to builtins.
There are also special .Internal
functions: NextMethod
,
Recall
, withVisible
, cbind
, rbind
(to allow
for the deparse.level
argument), eapply
, lapply
and
vapply
.
Prototypes are available for the primitive functions and operators, and
these are used for printing, args
and package checking (e.g. by
tools::checkS3methods
and by package codetools). There are
two environments in the base package (and namespace),
‘.GenericArgsEnv’ for those primitives which are internal S3
generics, and ‘.ArgsEnv’ for the rest. Those environments contain
closures with the same names as the primitives, formal arguments derived
(manually) from the help pages, a body which is a suitable call to
UseMethod
or NULL
and environment the base namespace.
The C code for print.default
and args
uses the closures in
these environments in preference to the definitions in base (as
primitives).
The QC function undoc
checks that all the functions prototyped in
these environments are currently primitive, and that the primitives not
included are better thought of as language elements (at the time of
writing
$ $<- && ( : @ @<- [ [[ [[<- [<- { || ~ <- <<- = break for function if next repeat return while
). One could argue about ~
, but it is known to the parser and has
semantics quite unlike a normal function. And :
is documented
with different argument names in its two meanings.
The QC functions codoc
and checkS3methods
also make use of
these environments (effectively placing them in front of base in the
search path), and hence the formals of the functions they contain are
checked against the help pages by codoc
. However, there are two
problems with the generic primitives. The first is that many of the
operators are part of the S3 group generic Ops
and that defines
their arguments to be e1
and e2
: although it would be very
unusual, an operator could be called as e.g. "+"(e1=a, e2=b)
and if method dispatch occurred to a closure, there would be an argument
name mismatch. So the definitions in environment .GenericArgsEnv
have to use argument names e1
and e2
even though the
traditional documentation is in terms of x
and y
:
codoc
makes the appropriate adjustment via
tools:::.make_S3_primitive_generic_env
. The second discrepancy
is with the Math
group generics, where the group generic is
defined with argument list (x, ...)
, but most of the members only
allow one argument when used as the default method (and round
and
signif
allow two as default methods): again fix-ups are used.
Those primitives which are in .GenericArgsEnv
are checked (via
tests/primitives.R) to be generic via defining methods for
them, and a check is made that the remaining primitives are probably not
generic, by setting a method and checking it is not dispatched to (but
this can fail for other reasons). However, there is no certain way to
know that if other .Internal
or primitive functions are not
internally generic except by reading the source code.
[For R-core use: reverse this procedure to remove a primitive. Most
commonly this is done by changing a .Internal
to a primitive or
vice versa.]
Primitives are listed in the table R_FunTab
in
src/main/names.c: primitives have ‘Y = 0’ in the ‘eval’
field.
There needs to be an ‘\alias’ entry in a help file in the base package, and the primitive needs to be added to one of the lists at the start of this section.
Some primitives are regarded as language elements (the current ones are
listed above). These need to be added to two lists of exceptions,
langElts
in undoc()
(in file
src/library/tools/R/QC.R) and lang_elements
in
tests/primitives.R.
All other primitives are regarded as functions and should be listed in
one of the environments defined in src/library/base/R/zzz.R,
either .ArgsEnv
or .GenericArgsEnv
: internal generics also
need to be listed in the character vector .S3PrimitiveGenerics
.
Note too the discussion about argument matching above: if you add a
primitive function with more than one argument by converting a
.Internal
you need to add argument matching to the C code, and
for those with a single argument, add argument-name checking.
Do ensure that make check-devel
has been run: that tests most
of these requirements.
The process of marking messages (errors, warnings etc) for translation
in an R package is described in
Internationalization in Writing R Extensions,
and the standard packages included with R have (with an exception in
grDevices for the menus of the windows()
device) been
internationalized in the same way as other packages.
Internationalization for R code is done in exactly the same way as
for extension packages. As all standard packages which have R code
also have a namespace, it is never necessary to specify domain
,
but for efficiency calls to message
, warning
and
stop
should include domain = NA
when the message is
constructed via gettextf
, gettext
or
ngettext
.
For each package, the extracted messages and translation sources are stored under package directory po in the source package, and compiled translations under inst/po for installation to package directory po in the installed package. This also applies to C code in packages.
The main C code (e.g. that in files src/*/*.c and in
the modules) is where R is closest to the sort of application for
which ‘gettext’ was written. Messages in the main C code are in
domain R
and stored in the top-level directory po with
compiled translations under share/locale.
The list of files covered by the R domain is specified in file po/POTFILES.in.
The normal way to mark messages for translation is via _("msg")
just as for packages. However, sometimes one needs to mark passages for
translation without wanting them translated at the time, for example
when declaring string constants. This is the purpose of the N_
macro, for example
{ ERROR_ARGTYPE, N_("invalid argument type")},
from file src/main/errors.c.
The P_
macro
#ifdef ENABLE_NLS #define P_(StringS, StringP, N) ngettext (StringS, StringP, N) #else #define P_(StringS, StringP, N) (N > 1 ? StringP: StringS) #endif
may be used
as a wrapper for ngettext
: however in some cases the preferred
approach has been to conditionalize (on ENABLE_NLS
) code using
ngettext
.
The macro _("msg")
can safely be used in directory
src/appl; the header for standalone ‘nmath’ skips possible
translation. (This does not apply to N_
or P_
).
Messages for the Windows GUI are in a separate domain ‘RGui’. This was done for two reasons:
iconv
we ported
works well under Windows, this is less important than anticipated.)
Messages for the ‘RGui’ domain are marked by G_("msg")
, a
macro that is defined in header file src/gnuwin32/win-nls.h. The
list of files that are considered is hardcoded in function update_RGui_po
in file src/library/tools/R/translations.R, which is invoked via the
update-RGui
target of file po/Makefile.win: note
that this includes devWindows.c as the menus on the
windows
device are considered to be part of the GUI. (There is
also GN_("msg")
, the analogue of N_("msg")
.)
The template and message catalogs for the ‘RGui’ domain are in the top-level po directory of package base.
This is handled separately: see https://developer.r-project.org/Translations30.html.
The structure of source packages is described in Creating R packages in Writing R Extensions: this chapter is concerned with the structure of installed packages.
An installed package has a top-level file DESCRIPTION, a copy of the file of that name in the package sources with a ‘Built’ field appended, and file INDEX, usually describing the objects on which help is available, a file NAMESPACE if the package has a name space, optional files such as CITATION, LICENCE and NEWS, and any other files copied in from inst. It will have directories Meta, help and html (even if the package has no help pages), almost always has a directory R and often has a directory libs to contain compiled code. Other directories with known meaning to R are data, demo, doc and po.
Function library
looks for a namespace and if one is found
passes control to loadNamespace
. Then library
or
loadNamespace
looks for file R/pkgname, warns if it
is not found and otherwise sources the code (using sys.source
)
into the package’s environment, then lazy-loads a database
R/sysdata if present. So how R code gets loaded depends on
the contents of R/pkgname: a standard template to load
lazy-load databases are provided in share/R/nspackloader.R.
Compiled code is usually loaded when the package’s namespace is loaded
by a useDynlib
directive in a NAMESPACE file or by the
package’s .onLoad
function. Conventionally compiled code is
loaded by a call to library.dynam
and this looks in directory
libs (and in an appropriate sub-directory if sub-architectures
are in use) for a shared object (Unix-alike) or DLL (Windows).
Subdirectory data serves two purposes. In a package using
lazy-loading of data, it contains a lazy-load database Rdata,
plus a file Rdata.rds which contain a named character vector used
by data()
in the (unusual) event that it is used for such a
package. Otherwise it is a copy of the data directory in the
sources, with saved images re-compressed if R CMD INSTALL
--resave-data
was used.
Subdirectory demo supports the demo
function, and is
copied from the sources.
Subdirectory po contains (in subdirectories) compiled message catalogs.
Directory Meta contains several files in .rds
format, that
is serialized R objects written by saveRDS
. All packages
have files Rd.rds, hsearch.rds, links.rds,
features.rds, and
package.rds. Packages with namespaces have a file
nsInfo.rds, and those with data, demos or vignettes have
data.rds, demo.rds or vignette.rds files.
The structure of these files (and their existence and names) is private to R, so the description here is for those trying to follow the R sources: there should be no reference to these files in non-base packages.
File package.rds is a dump of information extracted from the
DESCRIPTION file. It is a list of several components. The
first, ‘DESCRIPTION’, is a character vector, the DESCRIPTION
file as read by read.dcf
. Further elements ‘Depends’,
‘Suggests’, ‘Imports’, ‘Rdepends’ and ‘Rdepends2’
record the ‘Depends’, ‘Suggests’ and ‘Imports’ fields.
These are all lists, and can be empty. The first three have an entry
for each package named, each entry being a list of length 1 or 3, which
element ‘name’ (the package name) and optional elements ‘op’
(a character string) and ‘version’ (an object of class
‘"package_version"’). Element ‘Rdepends’ is used for the
first version dependency on R, and ‘Rdepends2’ is a list of zero
or more R version dependencies—each is a three-element list of the
form described for packages. Element ‘Rdepends’ is no longer used,
but it is still potentially needed so R < 2.7.0 can detect that the
package was not installed for it.
File nsInfo.rds records a list, a parsed version of the NAMESPACE file.
File Rd.rds records a data frame with one row for each help file. The columns are ‘File’ (the file name with extension), ‘Name’ (the ‘\name’ section), ‘Type’ (from the optional ‘\docType’ section), ‘Title’, ‘Encoding’, ‘Aliases’, ‘Concepts’ and ‘Keywords’. All columns are character vectors apart from the last three, which are lists of character vectors.
File hsearch.rds records the information to be used by
‘help.search’. This is a list of four unnamed elements which are
character matrices for help files, aliases, keywords and concepts. All
the matrices have columns ‘ID’ and ‘Package’ which are used to
tie the aliases, keywords and concepts (the remaining column of the last
three elements) to a particular help file. The first element has
further columns ‘LibPath’ (stored as ""
and filled in what
the file is loaded), ‘name’, ‘title’, ‘topic’ (the first
alias, used when presenting the results as
‘pkgname::topic’) and ‘Encoding’.
File links.rds records a named character vector, the names being aliases and the values character strings of the form
"../../pkgname/html/filename.html"
File data.rds records a two-column character matrix with columns of dataset names and titles from the corresponding help file. File demo.rds has the same structure for package demos.
File vignette.rds records a data frame with one row for each ‘vignette’ (.[RS]nw file in inst/doc) and with columns ‘File’ (the full file path in the sources), ‘Title’, ‘PDF’ (the pathless file name of the installed PDF version, if present), ‘Depends’, ‘Keywords’ and ‘R’ (the pathless file name of the installed R code, if present).
All installed packages, whether they had any .Rd files or not, have help and html directories. The latter normally only contains the single file 00Index.html, the package index which has hyperlinks to the help topics (if any).
Directory help contains files AnIndex, paths.rds
and pkgname.rd[bx]. The latter two files are a lazy-load
database of parsed .Rd files, accessed by
tools:::fetchRdDB
. File paths.rds is a saved character
vector of the original path names of the .Rd files, used when
updating the database.
File AnIndex is a two-column tab-delimited file: the first column
contains the aliases defined in the help files and the second the
basename (without the .Rd or .rd extension) of the file
containing that alias. It is read by utils:::index.search
to
search for files matching a topic (alias), and read by scan
in
utils:::matchAvailableTopics
, part of the completion system.
File aliases.rds is the same information as AnIndex as a named character vector (names the topics, values the file basename), for faster access.
R provides many functions to work with files and directories: many of these have been added relatively recently to facilitate scripting in R and in particular the replacement of Perl scripts by R scripts in the management of R itself.
These functions are implemented by standard C/POSIX library calls, except on Windows. That means that filenames must be encoded in the current locale as the OS provides no other means to access the file system: increasingly filenames are stored in UTF-8 and the OS will translate filenames to UTF-8 in other locales. So using a UTF-8 locale gives transparent access to the whole file system.
Windows is another story. There the internal view of filenames is in
UTF-16LE (so-called ‘Unicode’), and standard C library calls can only
access files whose names can be expressed in the current codepage. To
circumvent that restriction, there is a parallel set of Windows-specific
calls which take wide-character arguments for filepaths. Much of the
file-handling in R has been moved over to using these functions, so
filenames can be manipulated in R as UTF-8 encoded character strings,
converted to wide characters (which on Windows are UTF-16LE) and passed
to the OS. The utilities RC_fopen
and filenameToWchar
help this process. Currently file.copy
to a directory,
list.files
, list.dirs
and path.expand
work only
with filepaths encoded in the current codepage.
All these functions do tilde expansion, in the same way as
path.expand
, with the deliberate exception of Sys.glob
.
File names may be case sensitive or not: the latter is the norm on
Windows and macOS, the former on other Unix-alikes. Note that this
is a property of both the OS and the file system: it is often possible
to map names to upper or lower case when mounting the file system. This
can affect the matching of patterns in list.files
and
Sys.glob
.
File names commonly contain spaces on Windows and macOS but not
elsewhere. As file names are handled as character strings by R,
spaces are not usually a concern unless file names are passed to other
process, e.g. by a system
call.
Windows has another couple of peculiarities. Whereas a POSIX file
system has a single root directory (and other physical file systems are
mounted onto logical directories under that root), Windows has separate
roots for each physical or logical file system (‘volume’), organized
under drives (with file paths starting D:
for an
ASCII letter, case-insensitively) and network shares
(with paths like \netname\topdir\myfiles\a file
). There is a
current drive, and path names without a drive part are relative to the
current drive. Further, each drive has a current directory, and
relative paths are relative to that current directory, on a particular
drive if one is specified. So D:dir\file and D: are valid
path specifications (the last being the current directory on drive
D:).
R’s graphics internals were re-designed to enable multiple graphics systems to be installed on top on the graphics ‘engine’ – currently there are two such systems, one supporting ‘base’ graphics (based on that in S and whose R code15 is in package graphics) and one implemented in package grid.
Some notes on the historical changes can be found at https://www.stat.auckland.ac.nz/~paul/R/basegraph.html and https://www.stat.auckland.ac.nz/~paul/R/graphicsChanges.html.
At the lowest level is a graphics device, which manages a plotting surface (a screen window or a representation to be written to a file). This implements a set of graphics primitives, to ‘draw’
as well as requests for information such as
and requests/opportunities to take action such as
The device also sets a number of variables, mainly Boolean flags indicating its capabilities. Devices work entirely in ‘device units’ which are up to its developer: they can be in pixels, big points (1/72 inch), twips, …, and can differ16 in the ‘x’ and ‘y’ directions.
The next layer up is the graphics ‘engine’ that is the main interface to
the device (although the graphics subsystems do talk directly to
devices). This is responsible for clipping lines, rectangles and
polygons, converting the pch
values 0...26
to sets of
lines/circles, centring (and otherwise adjusting) text, rendering
mathematical expressions (‘plotmath’) and mapping colour descriptions
such as names to the internal representation.
Another function of the engine is to manage display lists and snapshots.
Some but not all instances of graphics devices maintain display lists, a
‘list’ of operations that have been performed on the device to produce
the current plot (since the device was opened or the plot was last
cleared, e.g. by plot.new
). Screen devices generally maintain
a display list to handle repaint and resize events whereas file-based
formats do not—display lists are also used to implement
dev.copy()
and friends. The display list is a pairlist of
.Internal
(base graphics) or .Call.graphics
(grid
graphics) calls, which means that the C code implementing a graphics
operation will be re-called when the display list is replayed: apart
from the part which records the operation if successful.
Snapshots of the current graphics state are taken by
GEcreateSnapshot
and replayed later in the session by
GEplaySnapshot
. These are used by recordPlot()
,
replayPlot()
and the GUI menus of the windows()
device.
The ‘state’ includes the display list.
The top layer comprises the graphics subsystems. Although there is
provision for 24 subsystems since about 2001, currently still only two
exist, ‘base’ and
‘grid’. The base subsystem is registered with the engine when R is
initialized, and unregistered (via KillAllDevices
) when an R
session is shut down. The grid subsystem is registered in its
.onLoad
function and unregistered in the .onUnload
function. The graphics subsystem may also have ‘state’ information
saved in a snapshot (currently base does and grid does not).
Package grDevices was originally created to contain the basic
graphics devices (although X11
is in a separate load-on-demand
module because of the volume of external libraries it brings in). Since
then it has been used for other functionality that was thought desirable
for use with grid, and hence has been transferred from package
graphics to grDevices. This is principally concerned with
the handling of colours and recording and replaying plots.
R ships with several graphics devices, and there is support for third-party packages to provide additional devices—several packages now do. This section describes the device internals from the viewpoint of a would-be writer of a graphics device.
There are two types used internally which are pointers to structures related to graphics devices.
The DevDesc
type is a structure defined in the header file
R_ext/GraphicsDevice.h (which is included by
R_ext/GraphicsEngine.h). This describes the physical
characteristics of a device, the capabilities of the device driver and
contains a set of callback functions that will be used by the graphics
engine to obtain information about the device and initiate actions
(e.g. a new page, plotting a line or some text). Type pDevDesc
is a pointer to this type.
The following callbacks can be omitted (or set to the null pointer,
their default value) when appropriate default behaviour will be taken by
the graphics engine: activate
, cap
, deactivate
,
locator
, holdflush
(API version 9), mode
,
newFrameConfirm
, path
, raster
and size
.
The relationship of device units to physical dimensions is set by the
element ipr
of the DevDesc
structure: a ‘double’
array of length 2.
The GEDevDesc
type is a structure defined in
R_ext/GraphicsEngine.h (with comments in the file) as
typedef struct _GEDevDesc GEDevDesc; struct _GEDevDesc { pDevDesc dev; Rboolean displayListOn; SEXP displayList; SEXP DLlastElt; SEXP savedSnapshot; Rboolean dirty; Rboolean recordGraphics; GESystemDesc *gesd[MAX_GRAPHICS_SYSTEMS]; Rboolean ask; }
So this is essentially a device structure plus information about the
device maintained by the graphics engine and normally17 visible to the engine
and not to the device. Type pGEDevDesc
is a pointer to this
type.
The graphics engine maintains an array of devices, as pointers to
GEDevDesc
structures. The array is of size 64 but the first
element is always occupied by the "null device"
and the final
element is kept as NULL as a sentinel.18 This array is reflected in the R variable
‘.Devices’. Once a device is killed its element becomes available
for reallocation (and its name will appear as ""
in
‘.Devices’). Exactly one of the devices is ‘active’: this is the
the null device if no other device has been opened and not killed.
Each instance of a graphics device needs to set up a GEDevDesc
structure by code very similar to
pGEDevDesc gdd; R_GE_checkVersionOrDie(R_GE_version); R_CheckDeviceAvailable(); BEGIN_SUSPEND_INTERRUPTS { pDevDesc dev; /* Allocate and initialize the device driver data */ if (!(dev = (pDevDesc) calloc(1, sizeof(DevDesc)))) return 0; /* or error() */ /* set up device driver or free 'dev' and error() */ gdd = GEcreateDevDesc(dev); GEaddDevice2(gdd, "dev_name"); } END_SUSPEND_INTERRUPTS;
The DevDesc
structure contains a void *
pointer
‘deviceSpecific’ which is used to store data specific to the
device. Setting up the device driver includes initializing all the
non-zero elements of the DevDesc
structure.
Note that the device structure is zeroed when allocated: this provides some protection against future expansion of the structure since the graphics engine can add elements that need to be non-NULL/non-zero to be ‘on’ (and the structure ends with 64 reserved bytes which will be zeroed and allow for future expansion).
Rather more protection is provided by the version number of the
engine/device API, R_GE_version
defined in
R_ext/GraphicsEngine.h together with access functions
int R_GE_getVersion(void); void R_GE_checkVersionOrDie(int version);
If a graphics device calls R_GE_checkVersionOrDie(R_GE_version)
it can ensure it will only be used in versions of R which provide the
API it was designed for and compiled against.
The DevDesc
structure also contains an int
‘deviceVersion’
to indicate which version of the engine/device API that the device supports.
If the device driver sets this correctly,
there is no need for a device driver to use
R_GE_checkVersionOrDie(R_GE_version)
because the graphics engine will
not make use of callbacks from an API version above the version that is
supported by the device.
The following ‘capabilities’ can be defined for the device’s
DevDesc
structure.
canChangeGamma
–
Rboolean
: can the display gamma be adjusted? This is now
ignored, as gamma support has been removed.
canHadj
–
integer
: can the device do horizontal adjustment of text
via the text
callback, and if so, how precisely? 0 = no
adjustment, 1 = {0, 0.5, 1} (left, centre, right justification) or 2 =
continuously variable (in [0,1]) between left and right justification.
canGenMouseDown
–
Rboolean
: can the device handle mouse down events? This
flag and the next three are not currently used by R, but are maintained
for back compatibility.
canGenMouseMove
–
Rboolean
: ditto for mouse move events.
canGenMouseUp
–
Rboolean
: ditto for mouse up events.
canGenKeybd
–
Rboolean
: ditto for keyboard events.
hasTextUTF8
–
Rboolean
: should non-symbol text be sent (in UTF-8) to the
textUTF8
and strWidthUTF8
callbacks, and sent as Unicode
points (negative values) to the metricInfo
callback?
wantSymbolUTF8
–
Rboolean
: should symbol text be handled in UTF-8 in the same way
as other text? Requires textUTF8 = TRUE
.
haveTransparency
:
does the device support semi-transparent colours?
haveTransparentBg
:
can the background be fully or semi-transparent?
haveRaster
:
is there support for rendering raster images?
haveCapture
:
is there support for grid::grid.cap
?
haveLocator
:
is there an interactive locator?
deviceClip
:
should the engine leave all clipping to the device?
haveRaster
,
haveCapture
, and haveLocator
can often be deduced to be false from the presence of
NULL
entries instead of the corresponding functions.
In addition, the capabilities
callback allows the device driver
to provide more detailed information, especially related to callbacks
in the engine/device API version 13 or higher.
The capabilities
callback is called with a list of integer
vectors that represent the best guess that the graphics engine
can make, based on the flags in the DevDesc
structure and
the ‘deviceVersion’. For some capabilities, the integer vector
is length 1 with 0
for no support, 1
for support, or
NA
for unknown support. For capabilities where support
can be more nuanced, the integer vector may either take higher values
or it may have length greater than 1,
though length 1 and 0
still means no support and NA
still means
unknown support.
The following components of
this list are likely to need modifying (for these, the graphics engine
can only guess 0
if ‘deviceVersion’ is too low or NA
otherwise):
patterns
component reports what sort of pattern fills are
supported. If the device supports one or more pattern types,
this component should be replaced with an integer vector containing
a value for each supported pattern type;
the graphics engine provides
constants R_GE_linearGradientPattern
,
R_GE_radialGradientPattern
, and
R_GE_tilingPattern
.
If the device does not provide support, this component should
be set to 0.
clippingPaths
component reports whether
arbitrary clipping paths are supported.
If the device supports clipping paths, this component should be set to 1.
If the device does not provide support, this component should
be set to 0.
masks
component reports what sort of masks are supported.
If the device supports one or more mask types,
this component should be replaced with an integer vector containing
a value for each supported mask type;
the graphics engine provides
constants R_GE_alphaMask
and R_GE_luminanceMask
.
If the device does not provide support, this component should
be set to 0.
compositing
component reports which compositing operators
are supported.
If the device supports one or more compositing operators,
this component should be replaced with an integer vector containing
a value for each supported operator;
The list of possible operators is long,
encompassing Porter-Duff operators and Adobe PDF Blend Modes;
the graphics engine provides constants R_GE_compositeClear
, etc.
If the device does not provide support, this component should
be set to 0.
transformations
component reports whether
affine transformations are supported.
If the device supports transformations, this component should be set to 1.
If the device does not provide support, this component should
be set to 0.
paths
component reports whether stroking and
filling of paths composed of multiple shapes is supported.
If the device supports stroking and filling paths,
this component should be set to 1.
If the device does not provide support, this component should
be set to 0.
glyphs
component reports whether rendering glyphs
(e.g., via grid::grid.glyph()
) is supported.
If the device supports rendering glyphs,
this component should be set to 1.
If the device does not provide support, this component should
be set to 0.
The graphics engine provides constants like
R_GE_capability_patterns
for selecting the appropriate
component of the list of capabilities.
It is valid (if unhelpful) for the device driver to return the list of capabilities unaltered.
Handling text is probably the hardest task for a graphics device, and the design allows for the device to optionally indicate that it has additional capabilities. (If the device does not, these will if possible be handled in the graphics engine.)
The three callbacks for handling text that must be in all graphics
devices are text
, strWidth
and metricInfo
with
declarations
void text(double x, double y, const char *str, double rot, double hadj, pGgcontext gc, pDevDesc dd); double strWidth(const char *str, pGEcontext gc, pDevDesc dd); void metricInfo(int c, pGEcontext gc, double* ascent, double* descent, double* width, pDevDesc dd);
The ‘gc’ parameter provides the graphics context, most importantly the current font and font size, and ‘dd’ is a pointer to the active device’s structure.
The text
callback should plot ‘str’ at ‘(x,
y)’19 with an anti-clockwise rotation of
‘rot’ degrees. (For ‘hadj’ see below.) The interpretation
for horizontal text is that the baseline is at y
and the start is
a x
, so any left bearing for the first character will start at
x
.
The strWidth
callback computes the width of the string which it
would occupy if plotted horizontally in the current font. (Width here
is expected to include both (preferably) or neither of left and right
bearings.)
The metricInfo
callback computes the size of a single
character: ascent
is the distance it extends above the baseline
and descent
how far it extends below the baseline.
width
is the amount by which the cursor should be advanced when
the character is placed. For ascent
and descent
this is
intended to be the bounding box of the ‘ink’ put down by the glyph and
not the box which might be used when assembling a line of conventional
text (it needs to be for e.g. hat(beta)
to work correctly).
However, the width
is used in plotmath to advance to the next
character, and so needs to include left and right bearings.
The interpretation of ‘c’ depends on the locale. In a
single-byte locale values 32...255
indicate the corresponding
character in the locale (if present). For the symbol font (as used by
‘graphics::par(font=5)’, ‘grid::gpar(fontface=5’) and by
‘plotmath’), values 32...126, 161...239, 241...254
indicate
glyphs in the Adobe Symbol encoding. In a multibyte locale, c
represents a Unicode point (except in the symbol font). So the function
needs to include code like
Rboolean Unicode = mbcslocale && (gc->fontface != 5); if (c < 0) { Unicode = TRUE; c = -c; } if(Unicode) UniCharMetric(c, ...); else CharMetric(c, ...);
In addition, if device capability hasTextUTF8
(see below) is
true, Unicode points will be passed as negative values: the code snippet
above shows how to handle this. (This applies to the symbol font only
if device capability wantSymbolUTF8
is true.)
If possible, the graphics device should handle clipping of text. It
indicates this by the structure element canClip
which if true
will result in calls to the callback clip
to set the clipping
region. If this is not done, the engine will clip very crudely (by
omitting any text that does not appear to be wholly inside the clipping
region).
The device structure has an integer element canHadj
, which
indicates if the device can do horizontal alignment of text. If this is
one, argument ‘hadj’ to text
will be called as 0 ,0.5,
1
to indicate left-, centre- and right-alignment at the indicated
position. If it is two, continuous values in the range [0, 1]
are assumed to be supported.
Capability hasTextUTF8
if true, it has two consequences.
First, there are callbacks textUTF8
and strWidthUTF8
that
should behave identically to text
and strWidth
except that
‘str’ is assumed to be in UTF-8 rather than the current locale’s
encoding. The graphics engine will call these for all text except in
the symbol font. Second, Unicode points will be passed to the
metricInfo
callback as negative integers. If your device would
prefer to have UTF-8-encoded symbols, define wantSymbolUTF8
as
well as hasTextUTF8
. In that case text in the symbol font is
sent to textUTF8
and strWidthUTF8
.
Some devices can produce high-quality rotated text, but those based on
bitmaps often cannot. Those which can should set
useRotatedTextInContour
to be true from graphics API version 4.
Several other elements relate to the precise placement of text by the graphics engine:
double xCharOffset; double yCharOffset; double yLineBias; double cra[2];
These are more than a little mysterious. Element cra
provides an
indication of the character size, par("cra")
in base graphics, in
device units. The mystery is what is meant by ‘character size’: which
character, which font at which size? Some help can be obtained by
looking at what this is used for. The first element, ‘width’, is not
used by R except to set the graphical parameters. The second,
‘height’, is use to set the line spacing, that is the relationship
between par("mar")
and par("mai")
and so on. It is
suggested that a good choice is
dd->cra[0] = 0.9 * fnsize; dd->cra[1] = 1.2 * fnsize;
where ‘fnsize’ is the ‘size’ of the standard font (cex=1
)
on the device, in device units. So for a 12-point font (the usual
default for graphics devices), ‘fnsize’ should be 12 points in
device units.
The remaining elements are yet more mysterious. The postscript()
device says
/* Character Addressing Offsets */ /* These offsets should center a single */ /* plotting character over the plotting point. */ /* Pure guesswork and eyeballing ... */ dd->xCharOffset = 0.4900; dd->yCharOffset = 0.3333; dd->yLineBias = 0.2;
It seems that xCharOffset
is not currently used, and
yCharOffset
is used by the base graphics system to set vertical
alignment in text()
when pos
is specified, and in
identify()
. It is occasionally used by the graphic engine when
attempting exact centring of text, such as character string values of
pch
in points()
or grid.points()
—however, it is
only used when precise character metric information is not available or
for multi-line strings.
yLineBias
is used in the base graphics system in axis()
and
mtext()
to provide a default for their ‘padj’ argument.
From R_GE_version
16 (R_GE_glyphs
), there is also a glyph
callback.
void glyph(int n, int *glyphs, double *x, double *y, SEXP font, double size, int colour, double rot, pDevDesc dd);
This instructs the device to draw a specific glyph within a given font, where the font is specified by filename (and index), with font family, weight, and style also provided as fallbacks.
The aim is to make the (default) output from graphics devices as similar
as possible. Generally people follow the model of the postscript
and pdf
devices (which share most of their internal code).
The following conventions have become established:
lwd = 1
should correspond to a line width of 1/96 inch. This
will be a problem with pixel-based devices, and generally there is a
minimum line width of 1 pixel (although this may not be appropriate
where anti-aliasing of lines is used, and cairo
prefers a minimum
of 2 pixels).
These conventions are less clear-cut for bitmap devices, especially where the bitmap format does not have a design resolution.
The interpretation of the line texture (par("lty"
) is described
in the header GraphicsEngine.h and in the help for par
: note that the
‘scale’ of the pattern should be proportional to the line width (at
least for widths above the default).
One of the device callbacks is a function mode
, documented in
the header as
* device_Mode is called whenever the graphics engine * starts drawing (mode=1) or stops drawing (mode=0) * GMode (in graphics.c) also says that * mode = 2 (graphical input on) exists. * The device is not required to do anything
Since mode = 2
has only recently been documented at device level.
It could be used to change the graphics cursor, but devices currently do
that in the locator
callback. (In base graphics the mode is set
for the duration of a locator
call, but if type != "n"
is
switched back for each point whilst annotation is being done.)
Many devices do indeed do nothing on this call, but some screen devices
ensure that drawing is flushed to the screen when called with mode
= 0
. It is tempting to use it for some sort of buffering, but note
that ‘drawing’ is interpreted at quite a low level and a typical single
figure will stop and start drawing many times. The buffering introduced
in the X11()
device makes use of mode = 0
to indicate
activity: it updates the screen after ca 100ms of inactivity.
This callback need not be supplied if it does nothing.
Graphics devices may be designed to handle user interaction: not all are.
Users may use grDevices::setGraphicsEventEnv
to set the
eventEnv
environment in the device driver to hold event
handlers. When the user calls grDevices::getGraphicsEvent
, R will
take three steps. First, it sets the device driver member
gettingEvent
to true
for each device with a
non-NULL
eventEnv
entry, and calls initEvent(dd,
true)
if the callback is defined. It then enters an event loop. Each
time through the loop R will process events once, then check whether any
device has set the result
member of eventEnv
to a
non-NULL
value, and will save the first such value found to be
returned. C functions doMouseEvent
and doKeybd
are
provided to call the R event handlers onMouseDown
,
onMouseMove
, onMouseUp
, and onKeybd
and set
eventEnv$result
during this step. Finally, initEvent
is
called again with init=false
to inform the devices that the
loop is done, and the result is returned to the user.
Specific devices are mostly documented by comments in their sources, although for devices of many years’ standing those comments can be in need of updating. This subsection is a repository of notes on design decisions.
The X11(type="Xlib")
device dates back to the mid 1990’s and was
written then in Xlib
, the most basic X11 toolkit. It has since
optionally made use of a few features from other toolkits: libXt
is used to read X11 resources, and libXmu
is used in the handling
of clipboard selections.
Using basic Xlib
code makes drawing fast, but is limiting. There
is no support of translucent colours (that came in the Xrender
toolkit of 2000) nor for rotated text (which R implements by
rendering text to a bitmap and rotating the latter).
The hinting for the X11 window asks for backing store to be used, and some windows managers may use it to handle repaints, but it seems that most repainting is done by replaying the display list (and here the fast drawing is very helpful).
There are perennial problems with finding fonts. Many users fail to realize that fonts are a function of the X server and not of the machine that R is running on. After many difficulties, R tries first to find the nearest size match in the sizes provided for Adobe fonts in the standard 75dpi and 100dpi X11 font packages—even that will fail to work when users of near-100dpi screens have only the 75dpi set installed. The 75dpi set allows sizes down to 6 points on a 100dpi screen, but some users do try to use smaller sizes and even 6 and 8 point bitmapped fonts do not look good.
Introduction of UTF-8 locales has caused another wave of difficulties.
X11 has very few genuine UTF-8 fonts, and produces composite fontsets
for the iso10646-1
encoding. Unfortunately these seem to have
low coverage apart from a few monospaced fonts in a few sizes (which are
not suitable for graph annotation), and where glyphs are missing what is
plotted is often quite unsatisfactory.
The current approach is to make use of more modern toolkits, namely
cairo
for rendering and Pango
for font
management—because these are associated with Gtk+2
they are
widely available. Cairo supports translucent colours and alpha-blending
(via Xrender
), and anti-aliasing for the display of lines
and text. Pango’s font management is based on fontconfig
and
somewhat mysterious, but it seems mainly to use Type 1 and TrueType
fonts on the machine running R and send grayscale bitmaps to cairo.
The windows()
device is a family of devices: it supports plotting
to Windows (enhanced) metafiles, BMP, JPEG, PNG and
TIFF files as well as to Windows printers.
In most of these cases the primary plotting is to a bitmap: this is used for the (default) buffering of the screen device, which also enables the current plot to be saved to BMP, JPEG, PNG or TIFF (it is the internal bitmap which is copied to the file in the appropriate format).
The device units are pixels (logical ones on a metafile device).
The code was originally written by Guido Masarotto with extensive use of macros, which can make it hard to disentangle.
For a screen device, xd->gawin
is the canvas of the screen, and
xd->bm
is the off-screen bitmap. So macro DRAW
arranges
to plot to xd->bm
, and if buffering is off, also to
xd->gawin
. For all other device, xd->gawin
is the canvas,
a bitmap for the jpeg()
and png()
device, and an internal
representation of a Windows metafile for the win.metafile()
and
win.print
device. Since ‘plotting’ is done by Windows GDI calls
to the appropriate canvas, its precise nature is hidden by the GDI
system.
Buffering on the screen device is achieved by running a timer, which when it fires copies the internal bitmap to the screen. This is set to fire every 500ms (by default) and is reset to 100ms after plotting activity.
Repaint events are handled by copying the internal bitmap to the screen canvas (and then reinitializing the timer), unless there has been a resize. Resizes are handled by replaying the display list: this might not be necessary if a fixed canvas with scrollbars is being used, but that is the least popular of the three forms of resizing.
Text on the device has moved to ‘Unicode’ (UCS-2) in recent years.
UTF-8 is requested (hasTextUTF8 = TRUE
) for standard text, and
converted to UCS-2 in the plotting functions in file
src/extra/graphapp/gdraw.c. However, GDI has no support for
Unicode symbol fonts, and symbols are handled in Adobe Symbol encoding.
There is support for translucent colours (with alpha channel between 0
and 255) was introduced on the screen device and bitmap
devices.20 This is done by drawing on a further internal bitmap,
xd->bm2
, in the opaque version of the colour then alpha-blending
that bitmap to xd->bm
. The alpha-blending routine is in a
separate DLL, msimg32.dll, which is loaded on first use. As
small a rectangular region as reasonably possible is alpha-blended (this
is rectangle r
in the code), but things like mitre joins make
estimation of a tight bounding box too much work for lines and polygonal
boundaries. Translucent-coloured lines are not common, and the
performance seems acceptable.
The support for a transparent background in png()
predates full
alpha-channel support in libpng
(let alone in PNG viewers), so
makes use of the limited transparency support in earlier versions of
PNG. Where 24-bit colour is used, this is done by marking a single
colour to be rendered as transparent. R chose ‘#fdfefd’, and
uses this as the background colour (in GA_NewPage
if the
specified background colour is transparent (and all non-opaque
background colours are treated as transparent). So this works by
marking that colour in the PNG file, and viewers without transparency
support see a slightly-off-white background, as if there were a
near-white canvas. Where a palette is used in the PNG file (if less
than 256 colours were used) then this colour is recorded with full
transparency and the remaining colours as opaque. If 32-bit colour were
available then we could add a full alpha channel, but this is dependent
on the graphics hardware and undocumented properties of GDI.
Devices receive colours as a typedef
rcolor
(an
unsigned int
) defined in the header
R_ext/GraphicsEngine.h). The 4 bytes are R ,G,
B and alpha from least to most significant. So each of RGB
has 256 levels of luminosity from 0 to 255. The alpha byte represents
opacity, so value 255 is fully opaque and 0 fully transparent: many but
not all devices handle semi-transparent colours.
Colors can be created in C via the macro R_RGBA
, and a set of
macros are defined in R_ext/GraphicsDevice.h to extract the
various components.
Colours in the base graphics system were originally adopted from S (and
before that the GRZ library from Bell Labs), with the concept of a
(variable-sized) palette of colours referenced by numbers
‘1...N’ plus ‘0’ (the background colour of the current
device). R introduced the idea of referring to colours by character
strings, either in the forms ‘#RRGGBB’ or ‘#RRGGBBAA’
(representing the bytes in hex) as given by function rgb()
or via
names: the 657 known names are given in the character vector
colors
and in a table in file colors.c in package
grDevices. Note that semi-transparent colours are not
‘premultiplied’, so 50% transparent white is ‘#ffffff80’.
Integer or character NA
colours are mapped internally to
transparent white, as is the character string "NA"
.
Negative colour numbers are an error. Colours greater than ‘N’ are wrapped around, so that for example with the default palette of size 8, colour ‘10’ is colour ‘2’ in the palette.
Integer colours have been used more widely than the base graphics
sub-system, as they are supported by package grid and hence by
lattice and ggplot2. (They are also used by package
rgl.) grid did re-define colour ‘0’ to be
transparent white, but rgl used col2rgb
and hence the
background colour of base graphics.
Note that positive integer colours refer to the current palette and
colour ‘0’ to the current device (and a device is opened if needs
be). These are mapped to type rcolor
at the time of use: this
matters when re-playing the display list, e.g. when a device is
resized or dev.copy
is used. The palette should be thought of as
per-session: it is stored in package grDevices.
The convention is that devices use the colorspace ‘sRGB’. This is an industry standard: it is used by Web browsers and JPEGs from all but high-end digital cameras. The interpretation is a matter for graphics devices and for code that manipulates colours, but not for the graphics engine or subsystems.
R uses a painting model similar to PostScript and PDF. This means that where shapes (circles, rectangles and polygons) can both be filled and have a stroked border, the fill should be painted first and then the border (or otherwise only half the border will be visible). Where both the fill and the border are semi-transparent there is some room for interpretation of the intention. Most devices first paint the fill and then the border, alpha-blending at each step. However, PDF does some automatic grouping of objects, and when the fill and the border have the same alpha, they are painted onto the same layer and then alpha-blended in one step. (See p. 569 of the PDF Reference Sixth Edition, version 1.7. Unfortunately, although this is what the PDF standard says should happen, it is not correctly implemented by some viewers.)
The mapping from colour numbers to type rcolor
is primarily done
by function RGBpar3
: this is exported from the R binary but
linked to code in package grDevices. The first argument is a
SEXP
pointing to a character, integer or double vector, and the
second is the rcolor
value for colour 0
(or "0"
).
C entry point RGBpar
is a wrapper that takes 0
to be
transparent white: it is often used to set colour defaults for devices.
The R-level wrapper is col2rgb
.
There is also R_GE_str2col
which takes a C string and converts to
type rcolor
: "0'
is converted to transparent white.
There is a R-level conversion of colours to ‘##RRGGBBAA’ by
image.default(useRaster = TRUE)
.
The other color-conversion entry point in the API is name2col
which takes a colour name (a C string) and returns a value of type
rcolor
. This handles "NA"
, "transparent"
and the
657 colours known to the R function colors()
.
The base graphics system was migrated to package graphics in R 3.0.0: it was previously implemented in files in src/main.
For historical reasons it is largely implemented in two layers.
Files plot.c, plot3d.c and par.c contain the code
for the around 30 .External
calls that implement the basic
graphics operations. This code then calls functions with names starting
with G
and declared in header Rgraphics.h in file
graphics.c, which in turn call the graphics engine (whose
functions almost all have names starting with GE
).
A large part of the infrastructure of the base graphics subsystem are
the graphics parameters (as set/read by par()
). These are stored
in a GPar
structure declared in the private header
Graphics.h. This structure has two variables (state
and
valid
) tracking the state of the base subsystem on the device,
and many variables recording the graphics parameters and functions of
them.
The base system state is contained in baseSystemState
structure
defined in the private header GraphicsBase.h.
This contains three GPar
structures and a Boolean variable used to record if plot.new()
(or persp
) has been used successfully on the device.
The three copies of the GPar
structure are used to store the
current parameters (accessed via gpptr
), the ‘device copy’
(accessed via dpptr
) and space for a saved copy of the ‘device
copy’ parameters. The current parameters are, clearly, those currently
in use and are copied from the ‘device copy’ whenever plot.new()
is called (whether or not that advances to the next ‘page’). The saved
copy keeps the state when the device was last completely cleared (e.g.
when plot.new()
was called with par(new=TRUE)
), and is
used to replay the display list.
The separation is not completely clean: the ‘device copy’ is altered if
a plot with log scale(s) is set up via plot.window()
.
There is yet another copy of most of the graphics parameters in
static
variables in graphics.c which are used to preserve
the current parameters across the processing of inline parameters in
high-level graphics calls (handled by ProcessInlinePars
).
Snapshots of the base subsystem record the ‘saved device copy’ of the
GPar
structure.
There is an unfortunate confusion between some of the graphical
parameters (as set by par
) and arguments to base graphic
functions of the same name. This description may help set the record
straight.
Most of the high-level plotting functions accept graphical parameters as additional arguments, which are then often passed to lower-level functions if not already named arguments (which is the main source of confusion).
Graphical parameter bg
is the background colour of the plot.
Argument bg
refers to the fill colour for the filled symbols
21
to 25
. It is an argument to the function
plot.xy
, but normally passed by the default method of
points
, often from a plot
method.
Graphics parameters cex
, col
, lty
, lwd
and
pch
also appear as arguments of plot.xy
and so are often
passed as arguments from higher-level plot functions such as
lines
, points
and plot
methods. They appear as
arguments of legend
, col
, lty
and lwd
are
arguments of arrows
and segments
. When used as arguments
they can be vectors, recycled to control the various lines, points and
segments. When set a graphical parameters they set the default
rendering: in addition par(cex=)
sets the overall character
expansion which subsequent calls (as arguments or on-line graphical
parameters) multiply.
The handling of missing values differs in the two classes of uses.
Generally these are errors when used in par
but cause the
corresponding element of the plot to be omitted when used as an element
of a vector argument. Originally the interpretation of arguments was
mainly left to the device, but nowadays some of this is pre-empted in
the graphics engine (but for example the handling of lwd = 0
remains device-specific, with some interpreting it as a ‘thinnest
possible’ line).
The standard R front-ends are programs which run in a terminal, but there are several ways to provide a GUI console.
This can be done by a package which is loaded from terminal-based R and launches a console as part of its startup code or by the user running a specific function: package Rcmdr is a well-known example with a Tk-based GUI.
There used to be a GTK-based console invoked by R --gui=GNOME
:
this relied on special-casing in the front-end shell script to launch a
different executable. There still is R --gui=Tk
, which starts
terminal-based R and runs tcltk::tkStartGui()
as part of the
modified startup sequence.
However, the main way to run a GUI console is to launch a separate
program which runs embedded R: this is done by Rgui.exe
on
Windows and R.app
on macOS. The first is an integral part
of R and the code for the console is currently in R.dll.
R.app
is a macOS application which provides a console. Its
sources are a separate project21, and its binaries
link to an R installation which it runs as a dynamic library
libR.dylib. The standard CRAN distribution of R for
macOS bundles the GUI and R itself, but installing the GUI is optional
and either component can be updated separately.
R.app
relies on libR.dylib being in a specific place,
and hence on R having been built and installed as a Mac macOS
‘framework’. Specifically, it uses
/Library/Frameworks/R.framework/R. This is a symbolic link, as
frameworks can contain multiple versions of R. It eventually
resolves to
/Library/Frameworks/R.framework/Versions/Current/Resources/lib/libR.dylib,
which is (in the CRAN distribution) a ‘fat’ binary containing
multiple sub-architectures.
macOS applications are directory trees: each R.app
contains
a front-end written in Objective-C for one sub-architecture: in the
standard distribution there are separate applications for 32- and 64-bit
Intel architectures.
Originally the R sources contained quite a lot of code used only by
the macOS GUI, but this was migrated to the R.app
sources.
R.app
starts R as an embedded application with a
command-line which includes --gui=aqua (see below). It uses
most of the interface pointers defined in the header
Rinterface.h, plus a private interface pointer in file
src/main/sysutils.c. It adds an environment
it names tools:RGUI
to the second position in the search path.
This contains a number of utility functions used to support the menu
items, for example package.manager()
, plus functions q()
and quit()
which mask those in package base—the custom
versions save the history in a way specific to R.app
.
There is a configure
option --with-aqua for R
which customizes the way R is built: this is distinct from the
--enable-R-framework option which causes make install
to install R as the framework needed for use with R.app
. (The
option --with-aqua is the default on macOS.) It sets the
macro HAVE_AQUA
in config.h and the make variable
BUILD_AQUA_TRUE
. These have several consequences:
quartz()
device is built (other than as a stub) in package
grDevices: this needs an Objective-C compiler. Then
quartz()
can be used with terminal R provided the latter has
access to the macOS screen.
quartz()
device(s).
capabilities("aqua")
is set to TRUE
.
system()
to return.
R_ProcessEvents
is inhibited in a forked child from package
parallel. The associated callback in R.app
does things
which should not be done in a child, and forking forks the whole process
including the console.
useaqua
is set to a true value. This has consequences:
R_Interactive
.
.Platform$GUI
is set to "AQUA"
. That has consequences:
DISPLAY
is set to ‘:0’ if not
already set.
PATH
since that is where
gfortran
is installed.
R.app
.
R.app
: these include graphical menus, the data editor (but not
the data viewer used by View()
) and the workspace browser invoked
by browseEnv()
.
R.app
and so informs any quartz
devices that a
Quartz event loop is already running.
system
function (including by system()
and system2()
, and to launch editors and pagers) is replaced by a
version in R.app
(which by default just calls the OS’s
system
with various signal handlers reset).
Rstd_WriteConsoleEx
. This uses ANSI terminal escapes to render
lines sent to stderr
as bold on stdout
.
-psn
is allowed but
ignored. (It seems that in 2003, ‘r27492’, this was added by Finder.)
The behavior of R CMD check
can be controlled through a
variety of command line arguments and environment variables.
There is an internal --install=value command line
argument not shown by R CMD check --help
, with possible values
check:file
Assume that installation was already performed with stdout/stderr to file, the contents of which need to be checked (without repeating the installation). This is useful for checks applied by repository maintainers: it reduces the check time by the installation time given that the package has already been installed. In this case, one also needs to specify where the package was installed to using command line option --library.
fake
Fake installation, and turn off the run-time tests.
skip
Skip installation, e.g., when testing recommended packages bundled with R.
no
The same as --no-install : turns off installation and the tests which require the package to be installed.
The following environment variables can be used to customize the
operation of check
: a convenient place to set these is the
check environment file (default, ~/.R/check.Renviron).
_R_CHECK_ALL_NON_ISO_C_
¶If true, do not ignore compiler (typically GCC) warnings about non ISO C code in system headers. Note that this may also show additional ISO C++ warnings. Default: false.
_R_CHECK_FORCE_SUGGESTS_
¶If true, give an error if suggested packages are not available. Default: true (but false for CRAN submission checks).
_R_CHECK_RD_CONTENTS_
¶If true, check Rd files for auto-generated content which needs editing, and missing argument documentation. Default: true.
_R_CHECK_RD_LINE_WIDTHS_
¶If true, check Rd line widths in usage and examples sections. Default: false (but true for CRAN submission checks).
_R_CHECK_RD_STYLE_
¶If true, check whether Rd usage entries for S3 methods use the full
function name rather than the appropriate \method
markup.
Default: true.
_R_CHECK_RD_XREFS_
¶If true, check the cross-references in .Rd files. Default: true.
_R_CHECK_SUBDIRS_NOCASE_
¶If true, check the case of directories such as R and man. Default: true.
_R_CHECK_SUBDIRS_STRICT_
¶Initial setting for --check-subdirs. Default: ‘default’ (which checks only tarballs, and checks in the src only if there is no configure file).
_R_CHECK_USE_CODETOOLS_
¶If true, make use of the codetools package, which provides a detailed analysis of visibility of objects (but may give false positives). Default: true (if recommended packages are installed).
_R_CHECK_USE_INSTALL_LOG_
¶If true, record the output from installing a package as part of its check to a log file (00install.out by default), even when running interactively. Default: true.
_R_CHECK_VIGNETTES_NLINES_
¶Maximum number of lines to show from the bottom of the output when
reporting errors in running or re-building vignettes. ( Value 0
means all lines will be shown.)
Default: 10 for running, 25 for re-building.
_R_CHECK_CODOC_S4_METHODS_
¶Control whether codoc()
testing is also performed on S4 methods.
Default: true.
_R_CHECK_DOT_INTERNAL_
¶Control whether the package code is scanned for .Internal
calls,
which should only be used by base (and occasionally by recommended) packages.
Default: true.
_R_CHECK_EXECUTABLES_
¶Control checking for executable (binary) files. Default: true.
_R_CHECK_EXECUTABLES_EXCLUSIONS_
¶Control whether checking for executable (binary) files ignores files listed in the package’s BinaryFiles file. Default: true (but false for CRAN submission checks). However, most likely this package-level override mechanism will be removed eventually.
_R_CHECK_PERMISSIONS_
¶Control whether permissions of files should be checked.
Default: true iff .Platform$OS.type == "unix"
.
_R_CHECK_FF_CALLS_
¶Allows turning off checkFF()
testing. If set to
‘registration’, checks the registration information (number of
arguments, correct choice of .C/.Fortran/.Call/.External
) for
such calls provided the package is installed.
Default: true.
_R_CHECK_FF_DUP_
¶Controls checkFF(check_DUP)
Default: true (and forced to be true for CRAN submission checks).
_R_CHECK_LICENSE_
¶Control whether/how license checks are performed. A possible value is ‘maybe’ (warn in case of problems, but not about standardizable non-standard license specs). Default: true.
_R_CHECK_RD_EXAMPLES_T_AND_F_
¶Control whether check_T_and_F()
also looks for “bad” (global)
‘T’/‘F’ uses in examples.
Off by default because this can result in false positives.
_R_CHECK_RD_CHECKRD_MINLEVEL_
¶Controls the minimum level for reporting warnings from checkRd()
.
Default: -1.
_R_CHECK_RD_NOTE_LOST_BRACES_
¶Control whether some of the “lost braces” that checkRd()
finds in
LaTeX-like Rd contexts are reported (by raising their warning level
to -1). This will often detect missing initial backslashes for Rd
macros, unescaped in-text set braces, and \describe
-style
\item{label}{desc}
entries within \itemize
.
Default: true.
_R_CHECK_RD_ALLOW_EMPTY_ITEM_IN_DESCRIBE_
¶Control whether empty items inside \describe
are allowed without
a warning. This is a temporary stop gap measure meant to support legacy
packages, and is likely to be removed in future versions of R.
Default: false.
_R_CHECK_XREFS_REPOSITORIES_
¶If set to a non-empty value, a space-separated list of repositories to use to determine known packages. Default: empty, when the CRAN and Bioconductor repositories known to R is used.
_R_CHECK_SRC_MINUS_W_IMPLICIT_
¶Control whether installation output is checked for compilation warnings
about implicit function declarations (as spotted by GCC with command
line option -Wimplicit-function-declaration, which is implied
by -Wall). NB: implicit function declarations are errors in
some recent C compilers, including Apple clang
.
Default: true from R 4.2.0, previously false.
_R_CHECK_SRC_MINUS_W_UNUSED_
¶Control whether installation output is checked for compilation warnings about unused code constituents (as spotted by GCC with command line option -Wunused, which is implied by -Wall). Default: true.
_R_CHECK_WALL_FORTRAN_
¶Control whether GFortran 4.0 or later -Wall warnings are used in the analysis of installation output. Default: false, even though the warnings are justifiable.
_R_CHECK_ASCII_CODE_
¶If true, check R code for non-ascii characters. Default: true.
_R_CHECK_ASCII_DATA_
¶If true, check data for non-ascii characters. En route, checks that all the datasets can be loaded and that their components can be accessed. Default: true.
_R_CHECK_COMPACT_DATA_
¶If true, check data for ascii and uncompressed saves, and also check if
using bzip2
or xz
compression would be significantly
better.
Default: true.
_R_CHECK_SKIP_ARCH_
¶Comma-separated list of architectures that will be omitted from checking in a multi-arch setup. Default: none.
_R_CHECK_SKIP_TESTS_ARCH_
¶Comma-separated list of architectures that will be omitted from running tests in a multi-arch setup. Default: none.
_R_CHECK_SKIP_EXAMPLES_ARCH_
¶Comma-separated list of architectures that will be omitted from running examples in a multi-arch setup. Default: none.
_R_CHECK_VC_DIRS_
¶Should the unpacked package directory be checked for version-control directories (CVS, .svn …)? Default: true for tarballs.
_R_CHECK_PKG_SIZES_
¶Should du
be used to find the installed sizes of packages?
R CMD check
does check for the availability of du
.
but this option allows the check to be overruled if an unsuitable
command is found (including one that does not respect the -k
flag to report in units of 1Kb, or reports in a different format – the
GNU, macOS and Solaris du
commands have been tested).
Default: true if du
is found.
_R_CHECK_PKG_SIZES_THRESHOLD_
¶Threshold used for _R_CHECK_PKG_SIZES_
(in Mb).
Default: 5
_R_CHECK_DOC_SIZES_
¶Should qpdf
be used to check the installed sizes of PDFs?
Default: true if qpdf
is found.
_R_CHECK_DOC_SIZES2_
¶Should gs
be used to check the installed sizes of PDFs? This
is slower than (and in addition to) the previous check, but does detect
figures with excessive detail (often hidden by over-plotting) or bitmap
figures with too high a resolution. Requires that R_GSCMD
is set
to a valid program, or gs
(or on Windows,
gswin32.exe
or gswin64c.exe
) is on the path.
Default: false (but true for CRAN submission checks).
_R_CHECK_ALWAYS_LOG_VIGNETTE_OUTPUT_
¶By default the output from running the R code in the vignettes is kept only if there is an error. This also applies to the build_vignettes.log log from the re-building of vignettes. Default: false.
_R_CHECK_CLEAN_VIGN_TEST_
¶Should the vign_test directory be removed if the test is successful? Default: true.
_R_CHECK_REPLACING_IMPORTS_
¶Should warnings about replacing imports be reported? These sometimes come
from auto-generated NAMESPACE files in other packages, but most
often from importing the whole of a namespace rather than using
importFrom
.
Default: true.
_R_CHECK_UNSAFE_CALLS_
¶Check for calls that appear to tamper with (or allow tampering with) already loaded code not from the current package: such calls may well contravene CRAN policies. Default: true.
_R_CHECK_TIMINGS_
¶Optionally report timings for installation, examples, tests and
running/re-building vignettes as part of the check log. The format is
‘[as/bs]’ for the total CPU time (including child processes)
‘a’ and elapsed time ‘b’, except on Windows, when it is
‘[bs]’. In most cases timings are only given for ‘OK’ checks.
Times with an elapsed component over 10 mins are reported in minutes
(with abbreviation ‘m’). The value is the smallest numerical value
in elapsed seconds that should be reported: non-numerical values
indicate that no report is required, a value of ‘0’ that a report
is always required.
Default: ""
. (10
for CRAN checks unless set in the environment.)
_R_CHECK_EXAMPLE_TIMING_THRESHOLD_
¶If timings are being recorded, set the threshold in seconds for
reporting long-running examples (either user+system CPU time or elapsed
time). Default: "5"
.
_R_CHECK_EXAMPLE_TIMING_CPU_TO_ELAPSED_THRESHOLD_
¶For checks with timings enabled, report examples where the ratio of CPU
time to elapsed time exceeds this threshold (and the CPU time is at
least one second). This can help detect the simultaneous use of
multiple CPU cores.
Default: NA
.
_R_CHECK_TEST_TIMING_CPU_TO_ELAPSED_THRESHOLD_
¶Report for running an individual test if the ratio of CPU time to
elapsed time exceeds this threshold (and the CPU time is at least one
second). Not supported on Windows.
Default: NA
.
_R_CHECK_VIGNETTE_TIMING_CPU_TO_ELAPSED_THRESHOLD_
¶Report if when running/re-building vignettes (individually or in
aggregate) the ratio of CPU time to elapsed time exceeds this threshold
(and the CPU time is at least one second). Not supported on
Windows.
Default: NA
.
_R_CHECK_INSTALL_TIMING_CPU_TO_ELAPSED_THRESHOLD_
¶Report if for installation the ratio of CPU time to elapsed time exceeds
this threshold (and the CPU time is at least one second). Not supported
on Windows, only uses if _R_CHECK_TIMINGS_
is set
Default: NA
.
_R_CHECK_CODETOOLS_PROFILE_
¶A string with comma-separated name=value
pairs (with
value a logical constant) giving additional arguments for the
codetools functions used for analyzing package code. E.g.,
use _R_CHECK_CODETOOLS_PROFILE_="suppressLocalUnused=FALSE"
to
turn off suppressing warnings about unused local variables. Default: no
additional arguments, corresponding to using skipWith = TRUE
,
suppressPartialMatchArgs = FALSE
and suppressLocalUnused =
TRUE
.
_R_CHECK_CRAN_INCOMING_
¶Check whether package is suitable for publication on CRAN. Default: false, except for CRAN submission checks.
_R_CHECK_CRAN_INCOMING_REMOTE_
¶Include checks that require remote access among the above.
Default: same as _R_CHECK_CRAN_INCOMING_
_R_CHECK_XREFS_USE_ALIASES_FROM_CRAN_
¶When checking anchored Rd xrefs, use Rd aliases from the CRAN package web areas in addition to those in the packages installed locally. Default: false.
_R_SHLIB_BUILD_OBJECTS_SYMBOL_TABLES_
¶Make the checks of compiled code more accurate by recording the symbol tables for objects (.o files) at installation in a file symbols.rds. (Only currently supported on Linux, Solaris, macOS, Windows and FreeBSD.) Default: true.
_R_CHECK_CODE_ASSIGN_TO_GLOBALENV_
¶Should the package code be checked for assignments to the global environment? Default: false (but true for CRAN submission checks).
_R_CHECK_CODE_ATTACH_
¶Should the package code be checked for calls to attach()
?
Default: false (but true for CRAN submission checks).
_R_CHECK_CODE_DATA_INTO_GLOBALENV_
¶Should the package code be checked for calls to data()
which load
into the global environment?
Default: false (but true for CRAN submission checks).
_R_CHECK_DOT_FIRSTLIB_
¶Should the package code be checked for the presence of the obsolete function
.First.lib()
?
Default: false (but true for CRAN submission checks).
_R_CHECK_DEPRECATED_DEFUNCT_
¶Should the package code be checked for the presence of recently deprecated or defunct functions (including completely removed functions). Also for platform-specific graphics devices. Default: false (but true for CRAN submission checks).
_R_CHECK_SCREEN_DEVICE_
¶If set to ‘warn’, give a warning if examples etc open a screen device. If set to ‘stop’, give an error. Default: empty (but ‘stop’ for CRAN submission checks).
_R_CHECK_WINDOWS_DEVICE_
¶If set to ‘stop’, give an error if a Windows-only device is used in example etc. This is only useful on Windows: the devices do not exist elsewhere. Default: empty (but ‘stop’ for CRAN submission checks on Windows).
_R_CHECK_TOPLEVEL_FILES_
¶Report on top-level files in the package sources that are not described in ‘Writing R Extensions’ nor are commonly understood (like ChangeLog). Variations on standard names (e.g. COPYRIGHT) are also reported. Default: false (but true for CRAN submission checks).
_R_CHECK_GCT_N_
¶Should the --use-gct use gctorture2(n)
rather than
gctorture(TRUE)
? Use a positive integer to enable this.
Default: 0
.
_R_CHECK_LIMIT_CORES_
¶If set, check the usage of too many cores in package parallel. If set to ‘warn’ gives a warning, to ‘false’ or ‘FALSE’ the check is skipped, and any other non-empty value gives an error when more than 2 children are spawned. Default: unset (but ‘TRUE’ for CRAN submission checks).
_R_CHECK_CODE_USAGE_VIA_NAMESPACES_
¶If set, check code usage (via codetools) directly on the package namespace without loading and attaching the package and its suggests and enhances. Default: true (and true for CRAN submission checks).
_R_CHECK_CODE_USAGE_WITH_ONLY_BASE_ATTACHED_
¶If set, check code usage (via codetools) with only the base package attached. Default: true.
_R_CHECK_EXIT_ON_FIRST_ERROR_
¶If set to a true value, the check will exit on the first error. Default: false.
_R_CHECK_OVERWRITE_REGISTERED_S3_METHODS_
¶If set to a true value, report already registered S3 methods in base/recommended packages which are overwritten when this package’s namespace is loaded. Default: false (but true for CRAN submission checks).
_R_CHECK_TESTS_NLINES_
¶Number of trailing lines of test output to reproduce in the log. If
0
all lines except the R preamble are reproduced.
Default: 13.
_R_CHECK_NATIVE_ROUTINE_REGISTRATION_
¶If set to a true value, report if the entry points to register native
routines and to suppress dynamic search are not found in a package’s
DLL. (NB: this requires system command nm
to be on the
PATH
. On Windows, objdump.exe
is first searched for in
compiler toolchain specified via Makeconf
(can be customized by
environment variable BINPREF
). If not found there, it must be on the
PATH
. On Unix this would be normal when using a package with compiled
code (which are the only ones this checks), but Windows’ users should check.
Default: false (but true for CRAN submission checks).
_R_CHECK_NO_STOP_ON_TEST_ERROR_
¶If set to a true value, do not stop running tests after first error (as if command line option --no-stop-on-test-error had been given). Default: false (but true for CRAN submission checks).
_R_CHECK_PRAGMAS_
¶Run additional checks on the pragmas in C/C++ source code and headers. Default: false (but true for CRAN submission checks).
_R_CHECK_COMPILATION_FLAGS_
¶If the package is installed and has C/C++/Fortran code, check the install log for non-portable flags (for example those added to src/Makevars during configuration). Currently -W flags are reported, except -Wall, -Wextra and -Weverything, and flags which appear to be attempts to suppress warnings are highlighted. See Writing portable packages in Writing R Extensions for the rationale of this check (and why even -Werror is unsafe).
Environment variable _R_CHECK_COMPILATION_FLAGS_KNOWN_
can be set
to a space-separated set of flags which come from the R build used
for testing (flags such as -Wall and -Wextra are
already known). For example, for CRAN builds of R >= 4.0.0 on macOS
one could use
_R_CHECK_COMPILATION_FLAGS_KNOWN_="-mmacosx-version-min=10.13"
Default: unset.
_R_CHECK_R_DEPENDS_
¶Check that any dependence on R is not on a recent patch-level version
such as R (>= 3.3.3)
since blocking installation of a package
will also block its reverse dependencies. Possible values
‘"note"’, ‘"warn"’ and logical values (where currently true
values are equivalent to ‘"note"’).
Default: false (but ‘"warn"’ for --as-cran).
_R_CHECK_SERIALIZATION_
¶Check that serialized R objects in the package sources were serialized with version 2 and there is no dependence on ‘R >= 3.5.0’. (Version 3 is in use as from R 3.5.0 but should only be used when necessary.) Default: false (but true for CRAN submission checks).
_R_CHECK_R_ON_PATH_
¶This checks if the package attempts to use R
or
Rscript
from the path rather than that under test.
It does so by putting scripts at the head of the path which print a
message and fail.
Default: false (but true for CRAN submission checks).
_R_CHECK_PACKAGES_USED_IN_TESTS_USE_SUBDIRS_
¶If set to a true value, also check the R code in common unit test subdirectories of tests for undeclared package dependencies. Default: false (but true for CRAN submission checks).
_R_CHECK_SHLIB_OPENMP_FLAGS_
¶Check correct and portable use of SHLIB_OPENMP_*FLAGS
in
src/Makevars (and similar).
Default: false (but true for CRAN submission checks).
_R_CHECK_CONNECTIONS_LEFT_OPEN_
¶When checking examples, check for each example if connections are left
open: if any are found, this is reported with a fatal error. NB:
‘connections’ includes most use of files and any parallel clusters which
have not be stopped by stopCluster()
.
Default: false (but true for CRAN submission checks).
_R_CHECK_FUTURE_FILE_TIMESTAMPS_
¶Check if any of the input files has a timestamp in the future (and to do so, checks that the system clock is correct to within 5 minutes). Default: false (but true for CRAN submission checks).
_R_CHECK_LENGTH_1_CONDITION_
¶No longer in use: conditions of length greater than one in if
or
while
statements are now an error.
_R_CHECK_VIGNETTES_SKIP_RUN_MAYBE_
¶Should running the R code in the vignettes be skipped if vignette outputs are to be rebuilt (which will involve running that code). Default: true.
_R_CHECK_BUILD_VIGNETTES_SEPARATELY_
¶Prior to R 3.6.0, re-building the vignette outputs was done in a single R session which allowed accidental reliance of one vignette on another (for example, in the loading of packages). The current default is to use a separate session for each vignette; this option allows testing the older behaviour, Default: true.
_R_CHECK_SYSTEM_CLOCK_
¶As part of the ‘checking for future file timestamps’ enabled by --as-cran, check the system clock against an external clock to catch errors such as the wrong day or even year. Not necessary on systems doing repeated checks. Default: true (but false for CRAN checking).
_R_CHECK_AUTOCONF_
¶For packages with a configure file generated by GNU
autoconf
and either configure.ac or
configure,.in, check that autoreconf
can, if available,
be run in a copy of the sources (this will detect missing source files
and report autoconf
warnings). Environment variable
AUTORECONf
controls the command used: it can give the full path to
autoreconf
(without spaces) and can include flags such as
--warnings=obsolete (which is added for autoreconf
version 2.68 or 2.69 and is the default for later versions).
Default: false (but true for CRAN submission checks).
_R_CHECK_DATALIST_
¶Check whether file data/datalist is out-of-date. Default: false (but true for CRAN submission checks).
_R_CHECK_THINGS_IN_CHECK_DIR_
¶Check and report at the end of the check run if files have been left in the check directory. Default: false (but true for CRAN submission checks).
_R_CHECK_THINGS_IN_TEMP_DIR_
¶Check and report at the end of the check run if files would have been
left in the temporary directory (usually /tmp on a Unix-alike).
It does this by setting the environment variable TEMPDIR
to a
subdirectory of the R session directory for the check
process:
if any files or directories are left there they are removed. Since some
of these might be out of the user’s control, environment variable
_R_CHECK_THINGS_IN_TEMP_DIR_EXCLUDE_
can specify an (extended
regex) pattern of file paths not to be reported – CRAN uses
‘^ompi.’ for directories left behind by OpenMPI. There are rare
instances where TEMPDIR
is not respected and so files are left in
/tmp (and not reported, but see the next item): one example is
/tmp/boost_interprocess on some OSes.
Default: false (but true for CRAN submission checks).
_R_CHECK_THINGS_IN_OTHER_DIRS_
¶Check and report at the end of the check run if new files or directories
are created in a selected set of directories during the check run.
(This is confined to files owned by the user running the check process.)
Currently the directories monitored are the home directory, /tmp
(excluding RtmpXXXXXX directories), /dav/shm, ~/.cache
(recursively) and ~/.local/share (recursively) or their
equivalents on Windows and macOS (the directories in which the default
settings for tools::R_user_dir()
use a R subdirectory).
Additional directories can be specified in environment variable
_R_CHECK_THINGS_IN_OTHER_DIRS_XTRA_
, separated by semicolons.
Directories are reported with a trailing ‘/’ on all platforms.
Environment variable _R_CHECK_THINGS_IN_OTHER_DIRS_EXCLUDE_
can
specify an (extended regex) pattern of file paths not to be reported –
this should match absolute file paths with home represented by
~. For example, on a Linux system
'^~/.cache/(mozilla/firefox|mesa_shader_cache)/'
matches cache directories used by Firefox and OpenGL (and their content). If the value starts with ‘@’ it is considered as a filepath which is read with each line treated as a pattern to be matched.
Note that other processes (include check runs in parallel) may create new files in these directories which will get reported. However, this optional check is very useful for narrowing down possible packages which are leaving behind unexpected files. Default: false
_R_CHECK_BASHISMS_
¶Check the top-level scripts configure (unless generated by
autoconf) and cleanup for non-Bourne-shell code, using the
Perl script checkbashisms
if available. This includes
reporting scripts using the non-portable #! /bin/bash
.
(Script checkbashisms
is available in most Linux distributions
in a package named either ‘devscripts’ or ‘devscripts-checkbashisms’
and from https://sourceforge.net/projects/checkbaskisms/files.)
Default: false (but true for CRAN submission checks except on Windows).
_R_CHECK_ORPHANED_
¶Check if dependencies are orphaned packages. As from R 4.1.0 this
checks strict dependencies recursively, so will report any orphaned
packages which are needed to attach the package by library()
as
well as any orphaned packages which are suggested.
Default: false (but true for CRAN submission checks).
_R_CHECK_EXCESSIVE_IMPORTS_
¶A positive integer. If set, give a NOTE if the number of imports from non-base packages exceed this threshold. Large numbers of imports make a package vulnerable to any of them becoming unavailable. Default: unset (but 20 for CRAN submission checks)
_R_CHECK_DONTTEST_EXAMPLES_
¶If true and examples are found with \donttest
sections, the
tests are run in one pass with these commented out and then in a
second pass including the \donttest
sections, (for the main
architecture only). Only for the first pass are the results compared
to any .Rout.save file and timings analysed. Overridden by
--run-donttest.
Default: false unless --as-cran is specified (which can be
overridden by setting ‘_R_CHECK_DONTTEST_EXAMPLES_=false’).
_R_CHECK_XREFS_PKGS_ARE_DECLARED_
¶Check if packages used in ‘anchored’ cross-references in .Rd
files (those of the form \link[pkg]{foo}
and
\link[pkg:bar]{foo}
) are declared in the
DESCRIPTION file and so these links can be checked.
Default: false.
_R_CHECK_XREFS_MIND_SUSPECT_ANCHORS_
¶Check if package-anchored Rd cross-references are to files (and not aliases). Default: false.
_R_CHECK_BOGUS_RETURN_
¶If true and _R_CHECK_USE_CODETOOLS_
is also true, functions are
scanned for use of return
rather than return()
.
Default: false (but true for CRAN submission checks).
_R_CHECK_MATRIX_DATA_
¶By default, the check for a mismatch between the data length and the
dimensions in a call to matrix
gives a warning: setting this to a
true value gives an error with a compact traceback.
Default: false (but true for CRAN submission checks).
_R_CHECK_CODE_CLASS_IS_STRING_
¶Check if package code has if()
condition which compare the class
of an object to a string.
See
https://blog.r-project.org/2019/11/09/when-you-think-class.-think-again/
why this is a bad idea.
Default: false (but true for CRAN submission checks).
_R_CHECK_RD_VALIDATE_RD2HTML_
¶Check the validity of the package HTML help pages using HTML Tidy
(https://www.html-tidy.org/) (if a suitable version is available
on the system path for executables or its path is specified by
environment variable R_TIDYCMD
). macOS users are advised to
install 5.8.0 or later from https://binaries.html-tidy.org/.
Default: false (but true for CRAN submission checks). --as-cran
can be overridden by setting this variable to a false value.
_R_CHECK_RD_MATH_RENDERING_
¶Check whether HTML math rendering via KaTeX works (if package V8 is available). See https://blog.r-project.org/2022/04/08/enhancements-to-html-documentation/. Default: false (but true for CRAN submission checks).
_R_CHECK_NEWS_IN_PLAIN_TEXT_
¶Check whether news()
can successfully read package news in plain
text (file NEWS) format.
Default: false (but true for CRAN submission checks).
_R_WIN_CHECK_INVALID_PARAMETERS_
¶Check whether arguments passed to the Windows C runtime are valid. When
enabled and a C runtime function is called with an invalid parameter, R
prints diagnostic information and unconditionally terminates. By default,
R for Windows following MinGW-W64 default causes UCRT to ignore invalid
parameters, but they may cause R to abort e.g. when R is embedded into
applications built with a different compiler toolchain. One may set the
value to "watson"
for interactive debugging on Windows via
_invoke_watson
.
Default: disabled.
_R_CHECK_BROWSER_NONINTERACTIVE_
¶If set to a true value, trap non-interactive debugger invocations.
These are most likely caused by leftover browser()
statements
in package code.
Default: unset (but true for CRAN submission checks).
_R_CHECK_URLS_SHOW_301_STATUS_
¶If set to a true value, checking URLs show check status 301 for HTTP response status code “301 Moved Permanently”. Default: false (but true for CRAN submission checks).
_R_CHECK_UNDOC_USE_ALL_NAMES_
¶If set to a true value, checking for undocumented objects does not ignore objects with names starting with a dot (which prior to the advent of namespaces conventionally were considered as “internal”). Default: false (but true for CRAN submission checks).
_R_CHECK_S3_METHODS_SHOW_POSSIBLE_ISSUES_
¶Default: false (but true for CRAN submission checks). If set to a true value, checking S3 methods also notes “possible issues”, including issues with apparent methods not registered and methods registered for non-generics. Default: false (but true for CRAN submission checks).
_R_CHECK_MBCS_CONVERSION_FAILURE_
¶If set to a non-empty value, makes warnings from pdf()
and
postscript()
about conversion failures from an MBCS (usually
UTF-8) into errors. Unless the value is ‘silent’, when the warnings
are suppressed.
Default: unset (but true for CRAN submission checks).
_R_CHECK_VALIDATE_UTF8_
¶If set to a non-empty value, makes installation warnings about non-UTF-8
strings in a package’s code (R/.*R) and help (man/*.Rd) files
into errors. On most platforms invalid bytes in these files get
converted to escapes (see iconv(sub = "byte")
), but on others
these lead to installation failure.
Default: unset (but true for CRAN submission checks).
_R_CHECK_XREFS_NOTE_MISSING_PACKAGE_ANCHORS_
¶If set to a true value, check whether Rd cross-references to targets not in the package itself or the base packages have package anchors. Default: false (but true for CRAN submission checks).
The following variables control checks for undeclared/unconditional use
of other packages. They work by setting up a temporary library
directory and setting .libPaths()
to just that and
.Library
, so are only effective if additional packages are
installed somewhere other than .Library
. The temporary library
is populated by symbolic links22 to installed packages not also in .Library
.
_R_CHECK_INSTALL_DEPENDS_
¶If set to a true value and a test installation is to be done, this is done with a temporary library populated by all the Depends/Imports/LinkingTo packages. Default: false (but true for CRAN submission checks).
Note that this is actually implemented in R CMD INSTALL
, so it
is available to those who first install recording to a log, then call
R CMD check
.
_R_CHECK_SUGGESTS_ONLY_
¶If set to a true value, running examples, tests and vignettes is done with a temporary library directory populated by all the Depends/Imports/Suggests packages. (As exceptions, packages in a ‘VignetteBuilder’ field are always made available.) Default: false (but true for CRAN submission checks: some of the regular checks use true and some use false).
_R_CHECK_DEPENDS_ONLY_
¶As for _R_CHECK_SUGGESTS_ONLY_
but using only Depends/Imports (and
the exceptions, including test-suite managers in ‘Suggests’).
Default: false
_R_CHECK_DEPENDS_ONLY_DATA_
¶Apply _R_CHECK_DEPENDS_ONLY_
only to the check of loading from
the data directory, so checks if any dataset depends on
packages which are in Suggests or undeclared.
Default: false (but true for CRAN submission checks)
_R_CHECK_DEPENDS_ONLY_EXAMPLES_
¶_R_CHECK_DEPENDS_ONLY_TESTS_
¶_R_CHECK_DEPENDS_ONLY_VIGNETTES_
¶Apply _R_CHECK_DEPENDS_ONLY_
only to the checking of
examples, tests or vignettes. These can be used on their own, or
with a false value to override _R_CHECK_DEPENDS_ONLY_
.
Default: the value of _R_CHECK_DEPENDS_ONLY_
or false if that is unset.
_R_CHECK_NO_RECOMMENDED_
¶If set to a true value, augment the previous checks to make recommended
packages unavailable unless declared (even if installed in .Library
).
Default: false (but true for CRAN submission checks).
This may give false positives on code which uses
grDevices::densCols
and stats:::.asSparse
/
stats:::.Diag
as these invoke KernSmooth and
Matrix respectively. (Those in stats are called from
various contrasts functions if sparse = TRUE
is used.)
The CRAN submission checks use something like
_R_CHECK_CRAN_INCOMING_=TRUE _R_CHECK_CRAN_INCOMING_REMOTE_=TRUE _R_CHECK_VC_DIRS_=TRUE _R_CHECK_TIMINGS_=10 _R_CHECK_INSTALL_DEPENDS_=TRUE _R_CHECK_SUGGESTS_ONLY_=TRUE _R_CHECK_NO_RECOMMENDED_=TRUE _R_CHECK_EXECUTABLES_EXCLUSIONS_=FALSE _R_CHECK_DOC_SIZES2_=TRUE _R_CHECK_CODE_ASSIGN_TO_GLOBALENV_=TRUE _R_CHECK_CODE_ATTACH_=TRUE _R_CHECK_CODE_DATA_INTO_GLOBALENV_=TRUE _R_CHECK_CODE_USAGE_VIA_NAMESPACES_=TRUE _R_CHECK_DOT_FIRSTLIB_=TRUE _R_CHECK_DEPRECATED_DEFUNCT_=TRUE _R_CHECK_REPLACING_IMPORTS_=TRUE _R_CHECK_SCREEN_DEVICE_=stop _R_CHECK_TOPLEVEL_FILES_=TRUE _R_CHECK_OVERWRITE_REGISTERED_S3_METHODS_=TRUE _R_CHECK_PRAGMAS_=TRUE _R_CHECK_COMPILATION_FLAGS_=TRUE _R_CHECK_R_DEPENDS_=warn _R_CHECK_SERIALIZATION_=TRUE _R_CHECK_R_ON_PATH_=TRUE _R_CHECK_PACKAGES_USED_IN_TESTS_USE_SUBDIRS_=TRUE _R_CHECK_SHLIB_OPENMP_FLAGS_=TRUE _R_CHECK_CONNECTIONS_LEFT_OPEN_=TRUE _R_CHECK_FUTURE_FILE_TIMESTAMPS_=TRUE _R_CHECK_AUTOCONF_=true _R_CHECK_DATALIST_=true _R_CHECK_THINGS_IN_CHECK_DIR_=true _R_CHECK_THINGS_IN_TEMP_DIR_=true _R_CHECK_BASHISMS_=true _R_CHECK_ORPHANED_=true _R_CHECK_BOGUS_RETURN_=true _R_CHECK_MATRIX_DATA_=TRUE _R_CHECK_CODE_CLASS_IS_STRING_=true _R_CHECK_RD_VALIDATE_RD2HTML_=true _R_CHECK_RD_MATH_RENDERING_=true _R_CHECK_NEWS_IN_PLAIN_TEXT_=true _R_CHECK_BROWSER_NONINTERACTIVE_=true _R_CHECK_URLS_SHOW_301_STATUS_=true _R_CHECK_UNDOC_USE_ALL_NAMES_=true _R_CHECK_S3_METHODS_SHOW_POSSIBLE_ISSUES_=true _R_CHECK_RD_NOTE_LOST_BRACES_=true _R_CHECK_XREFS_NOTE_MISSING_PACKAGE_ANCHORS_=true
These are turned on by R CMD check --as-cran
: the incoming
checks also use
_R_CHECK_FORCE_SUGGESTS_=FALSE
since some packages do suggest other packages not available on CRAN or other commonly-used repositories.
Several environment variables can be used to set ‘timeouts’: limits for
the elapsed time taken by the sub-processes used for parts of the
checks. A value of 0
indicates no limit, and is the default.
Character strings ending in ‘s’, ‘m’ or ‘h’ indicate a
number of seconds, minutes or hours respectively: other values are
interpreted as a whole number of seconds (with invalid inputs being
treated as no limit).
_R_CHECK_ELAPSED_TIMEOUT_
¶The default timeout for sub-processes not otherwise mentioned, and the
default value for all except _R_CHECK_ONE_TEST_ELAPSED_TIMEOUT_
.
(This is also used by tools::check_packages_in_dir
.)
_R_CHECK_INSTALL_ELAPSED_TIMEOUT_
¶Limit for when R CMD INSTALL
is run by check
.
_R_CHECK_EXAMPLES_ELAPSED_TIMEOUT_
¶Limit for running all the examples for one sub-architecture.
_R_CHECK_ONE_TEST_ELAPSED_TIMEOUT_
¶Limit for running one test for one sub-architecture. Default
_R_CHECK_TESTS_ELAPSED_TIMEOUT_
.
_R_CHECK_TESTS_ELAPSED_TIMEOUT_
¶Limit for running all the tests for one sub-architecture (and the default limit for running one test).
_R_CHECK_ONE_VIGNETTE_ELAPSED_TIMEOUT_
¶Limit for running the R code in one vignette, including for re-building each vignette separately.
_R_CHECK_BUILD_VIGNETTES_ELAPSED_TIMEOUT_
¶Limit for re-building all vignettes.
_R_CHECK_PKGMAN_ELAPSED_TIMEOUT_
¶Limit for each attempt at building the PDF package manual.
Another variable which enables stricter checks is to set
R_CHECK_CONSTANTS
to 5
. This checks that
nothing23 changes the values of ‘constants’24 in R
code. This is best used in conjunction with setting
R_JIT_STRATEGY
to 3
, which checks code on first use (by
default most code is only checked after byte-compilation on second use).
Unfortunately these checks slow down checking of examples, tests and
vignettes, typically two-fold but in the worst cases at least a
hundred-fold.
The following environment variables can be used to customize the
operation of INSTALL
.
_R_INSTALL_LIBS_ONLY_FORCE_DEPENDS_IMPORTS_
¶If true, give an error if installing only package libraries via --libs-only and some package imported or depended on is not available. Default: true (false only for special applications, which analyze native code of packages).
R is meant to run on a wide variety of platforms, including Linux and most variants of Unix as well as Windows and macOS. Therefore, when extending R by either adding to the R base distribution or by providing an add-on package, one should not rely on features specific to only a few supported platforms, if this can be avoided. In particular, although most R developers use GNU tools, they should not employ the GNU extensions to standard tools. Whereas some other software packages explicitly rely on e.g. GNU make or the GNU C++ compiler, R does not. Nevertheless, R is a GNU project, and the spirit of the GNU Coding Standards should be followed if possible.
The following tools can “safely be assumed” for R extensions.
make
, considering the features of make
in
4.2 BSD systems as a baseline.
GNU or other extensions, including pattern rules using
‘%’, the automatic variable ‘$^’, the ‘+=’ syntax to
append to the value of a variable, the (“safe”) inclusion of makefiles
with no error, conditional execution, and many more, must not be used
(see Chapter “Features” in the GNU Make Manual for
more information). On the other hand, building R in a separate
directory (not containing the sources) should work provided that
make
supports the VPATH
mechanism.
Windows-specific makefiles can assume GNU make
3.79
or later, as no other make
is viable on that platform.
grep
, sed
, and awk
.
There are POSIX standards for these tools, but these may not
be fully supported. Baseline features could be determined from a book
such as The UNIX Programming Environment by Brian W. Kernighan &
Rob Pike. Note in particular that ‘|’ in a regexp is an extended
regexp, and is not supported by all versions of grep
or
sed
. The Open Group Base Specifications, Issue 7, which are
technically identical to IEEE Std 1003.1 (POSIX), 2008,
are available at
https://pubs.opengroup.org/onlinepubs/9699919799/mindex.html.
Under Windows, most users will not have these tools installed, and you
should not require their presence for the operation of your package.
However, users who install your package from source will have them, as
they can be assumed to have followed the instructions in
The Windows toolset in R Installation and Administration
to obtain them. Redirection cannot be assumed to be available via
system
as this does not use a standard shell (let alone a
Bourne shell).
In addition, the following tools are needed for certain tasks.
texi2any
version 6.1 or later is needed to build the HTML
and Info files for the R manuals written in the GNU Texinfo
system. And that requires Perl.
It is also important that code is written in a way that allows others to
understand it. This is particularly helpful for fixing problems, and
includes using self-descriptive variable names, commenting the code, and
also formatting it properly. The R Core Team recommends to use a
basic indentation of 4 for R and C (and most likely also Perl) code,
and 2 for documentation in Rd format. Emacs (21 or later) users can
implement this indentation style by putting the following in one of
their startup files, and using customization to set the
c-default-style
to "bsd"
and c-basic-offset
to
4
.)
;;; ESS (add-hook 'ess-mode-hook (lambda () (ess-set-style 'C++ 'quiet) ;; Because ;; DEF GNU BSD K&R C++ ;; ess-indent-level 2 2 8 5 4 ;; ess-continued-statement-offset 2 2 8 5 4 ;; ess-brace-offset 0 0 -8 -5 -4 ;; ess-arg-function-offset 2 4 0 0 0 ;; ess-expression-offset 4 2 8 5 4 ;; ess-else-offset 0 0 0 0 0 ;; ess-close-brace-offset 0 0 0 0 0 (add-hook 'local-write-file-hooks (lambda () (ess-nuke-trailing-whitespace))))) (setq ess-nuke-trailing-whitespace-p 'ask) ;; or even ;; (setq ess-nuke-trailing-whitespace-p t)
;;; Perl (add-hook 'perl-mode-hook (lambda () (setq perl-indent-level 4)))
(The ‘GNU’ styles for Emacs’ C and R modes use a basic indentation of 2, which has been determined not to display the structure clearly enough when using narrow fonts.)
When you (as R developer) add new functions to the R base (all the packages distributed with R), be careful to check if make test-Specific or particularly, cd tests; make no-segfault.Rout still works (without interactive user intervention, and on a standalone computer). If the new function, for example, accesses the Internet, or requires GUI interaction, please add its name to the “stop list” in tests/no-segfault.Rin.
[To be revised: use make check-devel
, check the write barrier
if you change internal structures.]
Various dialects of TeX are used for different purposes in R. The policy is that manuals be written in ‘texinfo’, and for convenience the main and Windows FAQs are also. This has the advantage that it is easy to produce HTML and plain text versions as well as typeset manuals.
LaTeX is not used directly, but rather as an intermediate format for typeset help documents and for vignettes.
Care needs to be taken about the assumptions made about the R user’s
system: it may not have either ‘texinfo’ or a TeX system
installed. We have attempted to abstract out the cross-platform
differences, and almost all the setting of typeset documents is done by
tools::texi2dvi
. This is used for offline printing of help
documents, preparing vignettes and for package manuals via R
CMD Rd2pdf
. It is not currently used for the R manuals created in
directory doc/manual.
tools::texi2dvi
makes use of a system command texi2dvi
where available. On a Unix-alike this is usually part of
‘texinfo’, whereas on Windows if it exists at all it would be an
executable, part of MiKTeX. If none is available, the R code runs
a sequence of (pdf)latex
, bibtex
and
makeindex
commands.
This process has been rather vulnerable to the versions of the external
software used: particular issues have been texi2dvi
and
texinfo.tex updates, mismatches between the two25,
versions of the LaTeX package ‘hyperref’ and quirks in index
production. The licenses used for LaTeX and latterly ‘texinfo’
prohibit us from including ‘known good’ versions in the R
distribution.
On a Unix-alike configure
looks for the executables for TeX and
friends and if found records the absolute paths in the system
Renviron file. This used to record ‘false’ if no command
was found, but it nowadays records the name for looking up on the path
at run time. The latter can be important for binary distributions: one
does not want to be tied to, for example, TeX Live 2007.
This chapter is for notes about possible in-progress and future changes to R: there is no commitment to release such changes, let alone to a timescale.
Vectors in R 2.x.y were limited to a length of 2^31 - 1 elements
(about 2 billion), as the length is stored in the SEXPREC
as a C
int
, and that type is used extensively to record lengths and
element numbers, including in packages.
Note that longer vectors are effectively impossible under 32-bit platforms because of their address limit, so this section applies only on 64-bit platforms. The internals are unchanged on a 32-bit build of R.
A single object with 2^31 or more elements will take up at least 8GB of memory if integer or logical and 16GB if numeric or character, so routine use of such objects is still some way off.
There is now some support for long vectors. This applies to raw,
logical, integer, numeric and character vectors, and lists and
expression vectors. (Elements of character vectors (CHARSXP
s)
remain limited to 2^31 - 1 bytes.) Some considerations:
-1
and recording the actual length as a 64-bit field at the
beginning of the header. Because a fair amount of code in R uses a
signed type for the length, the ‘long length’ is recorded using the
signed C99 type ptrdiff_t
, which is typedef-ed to
R_xlen_t
.
-1
and
followed by two 32-bit fields giving the upper and lower 32-bits of the
actual length. There is currently a sanity check which limits lengths
to 2^48 on unserialization.
R_xlen_t
is made available to packages in C header
Rinternals.h: this should be fine in C code since C99 is
required. People do try to use R internals in C++, but C++98
compilers are not required to support these types.
INTSXP
or REALSXP
indices.
length
returns a double value if the length
exceeds 2^31-1. Code calling as.integer(length(x))
before passing
to .C
/.Fortran
should checks for an NA
result.
There is also some desire to be able to store larger integers in R,
although the possibility of storing these as double
is often
overlooked (and e.g. file pointers as returned by seek
are
already stored as double
).
Different routes have been proposed:
longint
. R’s usual
implicit coercion rules would ensure that supplying an integer
vector for indexing or length<-
would work.
integer
type
to be 64-bit on 64-bit platforms (which was the approach taken by S-PLUS
for DEC/Compaq Alpha systems). Or even on all platforms.
integer
or double
values for lengths and
indices, and return double
only when necessary.
The third has the advantages of minimal disruption to existing code and
not increasing memory requirements. In the first and third scenarios
both R’s own code and user code would have to be adapted for lengths
that were not of type integer
, and in the third code branches for
long vectors would be tested rarely.
Most users of the .C
and .Fortran
interfaces use
as.integer
for lengths and element numbers, but a few omit these
in the knowledge that these were of type integer
. It may be
reasonable to assume that these are never intended to be used with long
vectors.
The remaining interfaces will need to cope with the changed
VECTOR_SEXPREC
types. It seems likely that in most cases lengths
are accessed by the length
and LENGTH
functions26 The current approach is to keep these returning 32-bit lengths and
introduce ‘long’ versions xlength
and XLENGTH
which return
R_xlen_t
values.
See also https://homepage.cs.uiowa.edu/~luke/talks/useR10.pdf.
Matrices are stored as vectors and so were also limited to 2^31-1 elements. Now longer vectors are allowed on 64-bit platforms, matrices with more elements are supported provided that each of the dimensions is no more than 2^31-1. However, not all applications can be supported.
The main problem is linear algebra done by Fortran code compiled with
32-bit INTEGER
. Although not guaranteed, it seems that all the
compilers currently used with R on a 64-bit platform allow matrices
each of whose dimensions is less than 2^31 but with 2^31 or more
elements and index them correctly, and a substantial part of the
support software (such as BLAS and LAPACK) also
work.
There are exceptions: for example some complex LAPACK
auxiliary routines do use a single INTEGER
index and hence
overflow silently and segfault or give incorrect results. One example
seen was svd()
on a complex matrix.
Since this is implementation-dependent, it is possible that optimized
BLAS and LAPACK may have further restrictions:
a segfault have been reported from svd()
using ATLAS on
‘x86_64’ Linux.
For matrix algebra on large matrices one almost certainly wants a machine with a lot of RAM (100s of gigabytes), many cores and a multi-threaded BLAS.
Jump to: | _
.
A C D E G I L M N P R S T U V W |
---|
Jump to: | _
.
A C D E G I L M N P R S T U V W |
---|
Jump to: | .
A B C E F G L M N P S U V W |
---|
Jump to: | .
A B C E F G L M N P S U V W |
---|
strictly, a SEXPREC
node; VECTOR_SEXPREC
nodes are slightly smaller but followed by
data in the node.
a pointer to a function or a symbol to look up the function by name, or a language object to be evaluated to give a function.
The only current use is for hash tables of
environments (VECSXP
s), where length
is the size of the table
and truelength
is the number of primary slots in use, for the
reference hash tables in serialization (VECSXP
s), and for ‘growable’
vectors (atomic vectors, VECSXP
s and EXPRSXP
s) which are
created by slightly over-committing when enlarging a vector during
subassignment, so that some number of the following enlargements during
subassignment can be performed in place), where truelength
is the
number of slots in use.
Remember that attaching a list or a saved image actually creates and populates an environment and attaches that.
There is currently one other difference: when profiling builtin functions are counted as function calls but specials are not.
the other current example is left brace, which is implemented as a primitive.
only bits 0:4 are currently used
for SEXPTYPE
s but values 241:255 are used for
pseudo-SEXPTYPE
s.
Currently the only relevant bits are 0:1, 4, 14:15.
See define
USE_UTF8_IF_POSSIBLE
in old versions of file src/main/gram.c.
or UTF-16 if support for surrogates is enabled in the OS, which it used not to be when encoding support was added to R.
but not the GraphApp toolkit.
This can also create
non-S4 objects, as in new("integer")
.
although this is not recommended as it is less future-proof.
but apparently not on Windows.
The C code is in files base.c, graphics.c, par.c, plot.c and plot3d.c in directory src/main.
although that needs to be
handled carefully, as for example the circle
callback is given a
radius (and that should be interpreted as in the x units).
It is
possible for the device to find the GEDevDesc
which points to its
DevDesc
, and this is done often enough that there is a
convenience function desc2GEDesc
to do so.
Calling
R_CheckDeviceAvailable()
ensures there is a free slot or throws
an error.
in device coordinates
It is technically possible to use alpha-blending on metafile devices such as printers, but it seems few drivers have support for this.
an Xcode project, in SVN at https://svn.r-project.org/R-packages/trunk/Mac-GUI/.
under Windows, junction points,
or copies if environment variable R_WIN_NO_JUNCTIONS
has a
non-empty value.
The usual culprits are calls to compiled code
via .Call
or .External
which alter their
arguments.
things which the byte compiler assumes do not change, e.g. function bodies.
Linux distributions tend to unbundle texinfo.tex from ‘texinfo’.
but LENGTH
is a macro under some internal
uses.